Specifications

27
Channel Setting
This Recorder can receive a maximum of 84
channels as shown below by presetting the
channels into memory.
(VHF: AU 0-13, UHF: AU 28-69)
1 Press START MENU to display
the “START MENU” screen.
2 Press ' / " / \ / | to select
“OTHER SETTINGS 2”, then press
SET/ENTER.
Channel Setting
3 Press ' / " to select “MANUAL
TUNING”, then press SET/
ENTER.
4 Press ' / " to select “PRESET”,
then press \ / | to choose the
required preset channel.
MODE S E T T I NG
MAN U A L T U N I NG
CLOCK SETT I NG
: SELECT
:RETURN:ENTER
PRESET
CHANNE L
FINE TUNING
SK I P O
: SELECT
83
CH2 5
N OFF
:RETURN
:CHANGE
:ENTER
5 Press ' / " to select
“CHANNEL”, then press \ / | to
start tuning in either direction.
• If it is not the desired channel, press
\\
\\
\ /
||
||
| to continue tuning.
6 Press ' / " to select “FINE
TUNING”. Then press and hold \ /
| until the sharpest colour picture
is obtained.
7 Press ' / " to select “SKIP”,
then press \ / | to select “ON” or
“OFF”.
• The SKIP function determines
whether the channel can be selected
when using the CH
''
''
' /
""
""
" instead of
the Number buttons.
8 Press SET/ENTER to store this
channel. The Recorder will incre-
ment to the next channel up.
• If any more channels are to be tuned
in, repeat this procedure.
• Once all the channels have been
tuned in. Press START MENU or
EXIT to return to the normal screen.
Factory Preset Channels
The channel positions have been preset at
the factory as shown below:
NOTE
• Channel position numbers 0, 1, 3 to 6, 8,
11 to 27, and 29 to 83 have been factory
set to be skipped.
• If the picture is not clear or you want a
different channel from the one preset.
Follow the channel setting below to set the
desired channel.
Channel Position
0
1
2
3
4
5
6
7
8
9
10
11-27
28
29-83
Preset TV Channel
Skipped channel
Skipped channel
VHF 2
Skipped channel
Skipped channel
Skipped channel
Skipped channel
VHF 7
Skipped channel
VHF 9
VHF 10
Skipped channels
UHF 28
Skipped channels
DV-HR350X/300X-025-030 2004.4.8, 11:20 AM27