User Manual

123
GB
On-screen Error Messages
TITLE PROTECTION IS SET.
CANCEL TITLE PROTECTION
BEFORE DUBBING.
PROGRAM IS COPY PROTECTED.
CANNOT DUB TO THIS DISC.
CANNOT DUB TO THIS DISC.
CANNOT DUB FROM THIS DISC.
• Occurs when you attempt to dub a
title containing a “Copy Once” part
for which title protection has been
set.
• Occurs if you attempt to dub a title
containing a “Copy Once” part to
DVD-R or a non-CPRM compatible
DVD-RW.
• Occurs if an unrecordable disc is
loaded (i.e. when the maximum
number of titles or chapters is
exceeded, when the disc is
protected, when the disc is
scratched or dirty, or when the disc
is a ROM disc).
• Occurs when a disc other than a
DVD-RW/R is loaded.
• If a title contains a “Copy Once”
part, you can only move the
original. If title protection is set for a
title, you cannot move it, so perform
dubbing (movement) after cancel-
ling title protection.
• Dub in VR mode to a CPRM-
compatible DVD-RW.
• Replace with a recordable disc
(Page 10).
• Dub from a DVD-RW/R disc.
Error message
Possible Error Suggested Solution
Messages during Editing
CANNOT MAKE ANY MORE SELEC-
TIONS.
CANNOT SPECIFY THIS POSITION.
CHAPTER IS FULL. CANNOT
OPERATE.
CANNOT COMBINE THESE CHAP-
TERS.
• Occurs if you attempt to select
more than 20 titles (chapters) when
you perform Erase Selected Title.
• Occurs if you attempt to designate
a range shorter than 3 seconds and
edit.
• Occurs if the editing result exceeds
the upper limit of total number of
chapters (999).
• Occurs if you attempt to combine
chapters which cannot be com-
bined. (Chapters created when you
erase a scene or chapter in a single
title cannot be erased).
• Erase a maximum of 20 titles
(chapters) at a time.
• Designate a range of 3 seconds or
more. (If you designate a range of 3
seconds or more, you can
designate in frame units.)
• Edit after erasing unnecessary
chapter markers by combining
chapters.
Error message
Possible Error Suggested Solution
Other Message
THE GUIDE Plus+ SYSTEM IS NOT
AVAILABLE DURING PLAYBACK,
EDIT, ETC.
• Occurs if you press GUIDE to call
up the GUIDE Plus+ system during
playback, edit, etc.
• Quit playback, edit etc. and try
again.
Error message
Possible Error Suggested Solution