User Manual

GB
30
Channel Setting
This Recorder can receive a maximum of 84
channels as shown below by presetting the
channels into memory.
(VHF: E2–E12, UHF: E21–E69, CATV: S1–S41)
1 Press START MENU to display
the “START MENU” screen.
2 Press ' / "/ \ / | to select
(“OTHER SETTINGS”), then press
SET/ENTER.
Channel Setting
3 Press \ / | to select “VIEW/PLAY
SET”.
4 Press ' /" to select “CHANNEL
SETTING”, then press SET/
ENTER.
6 Press ' / " to select “PRESET”,
then press \ / | to choose the
required preset channel.
7 Press ' / " to select “CHAN-
NEL”, then press \ / | to start
tuning in either direction.
• If it is not the desired channel, press
\\
\\
\ /
||
||
| to continue tuning.
8 Press ' / " to select “FINE
TUNING”. Then press and hold \ /
| until the sharpest colour picture
is obtained.
9 Press ' / " to select “DE-
CODER”. This is preset to “OFF”.
If you connect a decoder, you
must use \ / | to turn the decoder
function “ON”.
10 Press ' / " to select “SKIP”,
then press \ / | to select “ON” or
“OFF”.
• The SKIP function determines
whether the channel can be selected
when using the CH
''
''
' /
""
""
" instead of
the Number buttons.
11 Press ' / " to select “SYSTEM”,
then press \ / | to select “B/G” or
“D/K”.
12 Press SET/ENTER to store this
channel.
• If any more channels are to be tuned
in, repeat this procedure.
• Once all the channels have been
tuned in, press START MENU or
EXIT to return to the normal screen.
5 Press ' / " to select “MANUAL
TUNING”, then press SET/
ENTER.
START MENU
[
OTHER SETTINGS
]
82:012
[
SAT
]
1/42
SELECT ENTER RETURN
ENTER
EXIT
EXIT
n
DISPLAYS SETTINGS BEFORE REC/PLAYBACK
ADJUSTMENTVIEW/PLAY SET CONTROL SETREC FUNCTION
DVD PLAYBACK SETTING
CHANNEL SETTING
PROGRESSIVE OUT SET
PIC QUALITY CONTROL
PASSWORD SETTING
OTHER SETTINGS
[
VIEW/PLAY SET: CHANNEL SETTING
]
82:012
[
SAT
]
1/42
ENTER
ENTER EXIT
EXITRETURN
SELECT
OTHER SETTINGS
[
VIEW/PLAY SET: CHANNEL SETTING
]
MANUAL TUNING
DELETE
NAME
NICAM
PRESET
CHANNEL
CH2
1
FINE TUNING
DECODER
SKIP
D/KB/G
ON
OFF
ON
OFF
SYSTEM
82:012
[
SAT
]
1/42
\|
\|
NOTE
• To switch between UHF/VHF and CATV,
press
.