User Manual

35
GB
Remote
Control
Remote Control
The same thing applies to
REC STOP and STOP buttons.
The Recorder
The
Recorder
=
=
=
+
+
Some operations such as "OPERATE" (turn
on/stand by), "RECORD" and "PLAY"(both HDD
and DVD) can be done by buttons both on the
Remote Control and the Recorder.
on HDD (left) side
on DVD (right) side
3
2
1
4
Preparation to Operate This Recorder
HDD
VR MODE
DVD-RW
VIDEO MODE
DVD-RW
DVD-R
DVD VIDEO
VIDEO CD
AUDIO CD
CD-R
WMAMP3
CD-RW
WMAMP3
CD-R
JPEG
CD-RW
JPEG
Turn on the power of TV.
Switch TV input to the AV
input used to connect to the
Recorder.
Press
to turn the
Recorder on.
TV broadcast will be displayed.
Operating HDD
Press
.
The HDD mode indicator in the front
panel display appears, and HDD
operation is enabled.
Operating DVD
Press
.
The DVD mode indicator in the
front panel display appears, and
DVD operation is enabled.
Recording and Playback
Refer to pages 38 to 79 for details
about recording and playback.
NOTE
When you turn on power, the HDD mode indicator and
DVD mode indicator in the Front Panel Display will blink.
As the system processing is in progress during blinking,
wait until the blinking stops and the HDD mode indicator
turns on.
NOTE
To operate HDD from Recorder, press the buttons on the
––HDD–– sign (left side). As for DVD, press the buttons
on the ––DVD–– sign (right side).