User Manual

GB
94
Disc Management
Lets you safely save a disc for which editing
is in progress.
• This operation will not work with Video
mode discs.
• Titles created with Play List (page 88)
cannot be protected.
Before Starting Editing
• Switch to the drive (HDD or DVD) to
be edited.
1 Select (“REC LIST”) in
“START MENU” screen, then
press SET/ENTER.
2 Press ' / "/ \ / | to select the
title to protect.
3 Press Blue (D) (FUNCTION
MENU).
4 Press ' / " to select “TITLE
PROTECT SET”, then press SET/
ENTER.
5 Press ' / " to select “YES”, then
press SET/ENTER.
• The protect mark
is attached to
protected titles.
(The protect mark can be confirmed
at either the “REC LIST” screen or
“EDIT” screen.)
6 Press EXIT to exit from Edit
mode.
Disabling Title Edit and
Erase (TITLE PROTECT)
HDD
VR MODE
DVD-RW
Disables edit and erase so you cannot
mistakenly change or erase the content of a
title.
01:017/42
REC LIST
(
HDD: ORIGINAL
)
[
FRI
]
CLOCK SETTING
PLAYBACK
ERASE
EDIT
HI SP DUB PRIORITY
CHANGE TITLE NAME
TITLE PROTECT SET
YES
NO
PROTECT THIS TITLE?
DISABLE ERASING AND EDITING.
ENABLE ERASING AND EDITING.
m.
1SAT 05/120006:
ARD
1 PR 1 SP
SP
20h00mHDD REMAIN:
XP
To Cancel Title Protect
1 Select the title protected in Step
2 above, and follow the Steps 3
and 4 above.
2 Select “NO” in the Step 5 above,
then press SET/ENTER.
NOTE
• If “DISC PROTECT” is set for a DVD-RW (VR
mode) disc, protection cannot be cancelled
for individual titles. Cancel “DISC
PROTECT”.
3 Press EXIT to exit from Edit
mode.
Disabling DVD Disc Edit
and Erase (DISC
PROTECT)
VR MODE
DVD-RW
Disables editing and erasing of the whole
DVD disc to protect all the contents of it from
being changed or erased mistakenly.
Before Starting Editing
• Switch to DVD.
1 Select (“ERASE”) in “START
MENU” screen, then press SET/
ENTER.
2 Press ' / " to select “DISC
PROTECT/UNPROTECT”, then
press SET/ENTER.
3 Press ' / " to select
“PROTECT”, then press SET/
ENTER.
4 Press EXIT to exit from Edit
mode.
To Cancel Title Protect
1 Follow the Steps 1 and 2 above.
2 Select “NOT PROTECT” in the
Step
3 above, then press SET/
ENTER.
10 Press ' / "/ \ / | to select “END”
and then press SET/ENTER
After input is finished.
• The new title is set, and the screen in
Step
5 is displayed.
11 Press EXIT to quit editing.
• Edit mode will terminate.