Operation Manual

GB
34
SETTING UP
Connecting to Audio Equipment
Playing Dolby Digital (5.1 channel), DTS and MPEG audio
• Connecting an amplifier with a Dolby Digital/DTS/MPEG Audio digital surround
processor or a Dolby Digital/DTS/MPEG Audio digital surround decoder to
your Player’s optical digital jack provides richer, more powerful audio play.
• To use DTS digital surround, use the Disc Menu screen (page 99) or the
Function control screen (page 81) to select DTS audio.
After making the above connection
1 Set the “ DIGITAL” in “AUDIO SETUP” to “BITSTREAM” (see page 58).
• To play a disc recorded with DTS, you need to use DTS processor or amplifier.
• This connection is not possible if the processor or amplifier to which you want to
connect does not have an optical digital input jack.
• Refer to the operation manual for the processor or amplifier for information about
connecting to it.
DIGITAL IN
OPTICALCOAXIAL
Optical digital cable
(commercially available)
To optical
digital
input jack
DIGITAL OUT (OPTICAL)
Dolby Digital (5.1ch)/
DTS/MPEG Audio
processor or amplifier