User Manual

45
GB
SETTING UP
7 Press " to select “CODE” and then use \ or | to select the desired
country code. (See page 43.)
8 Press ENTER to confirm the setting.
• To exit the Setup screen and return to the Startup screen, press SETUP
or RETURN.
Important!
• Be sure to try playing back the disc to confirm that the parental level setting is
working correctly. If it is not working correctly, try changing the country code.
Changing the parental level
1 While a disc is stopped, press SETUP to display the Setup screen.
2 Use ' or " to select the “ PARENTAL SETUP”.
3 Press ENTER to display the password verification screen.
4 Use ', ", \ or | to enter the 4-digit password that was set previously.
• Press ' or " to select the number.
• Press \ or | to move to the place where you enter the number.
• When you have finished entering your 4-digit number,
changes to .
If you forget your password, you can erase your current password by
pressing (F.ADV) four times.
5 Press ENTER and then use \ or | to change the parental level.
• If you enter the wrong number three times in succession, the normal
screen reappears.
6 Press " to select “CODE” and then use \ or | to select the desired
country code. (See page 43.)
7 Press ENTER to confirm the setting.
• To exit the Setup screen and return to the Startup screen, press SETUP
or RETURN.
Setup