User Manual

SETTING UP

Setting the DIGITAL OUT

When playing a disc recorded using Dolby Digital (5.1ch)/MPEG Audio (5.1ch),

you can specify either “BITSTREAM” or “D-PCM”/“PCM” as the digital type

output.

Setting the DOLBY DIGITAL

• At first, set the “SPEAKER” setting in “SPEAKER SETUP” to “2ch”. (See page

56.)

1 While a disc is stopped, press SETUP to display the Setup screen.

2 Use ' or " to select the “

AUDIO SETUP”.

3 Press ENTER and then use ' or " to select “ DIGITAL”.

4 Press ENTER to display the settings you

can select.

5 Use ' or " to select “BITSTREAM” or “D-PCM”.

BITSTREAM: Use this setting for a digital connection of a

receiver (amplifier) equipped with a Dolby Digital

decoder.

D-PCM: Use this setting for a digital connection to the

(Down Mix PCM) PCM digital input jack of a DAT or MD, or for a digital

connection to a receiver (amplifier) that does not have a

Dolby Digital decoder.

6 Press ENTER to confirm the setting.

• To exit the Setup screen and return to the Startup screen, press SETUP

or RETURN.

Setup

AUDIO SETUP

COMPRESSION:

MPEG:

D-PCM

DIGITAL:

BITSTREAM