Service manual

6 MAINTENANCE & LUBRICATION CHARTS
28
6.3 MAINTENANCE CHARTS ___________________________________________________________________
A - Add or Adjust C - Clean I - Inspect L- Lubricate R - Replace AR - As Required
* Indicates initial service for new machines.
** Or every two years whichever comes first.
*** Inspect visible hoses and tubes for leaks or oil marks.
**** Or when service indicator light comes on.
I - Manual grease gun with NLGI Grade 2 (Service Class LB).
II - Engine Oil - See Section 4.5.
III - Use Jacobsen hydraulic fluid: Capacity: 5 gallons (19 Liters). Order
Part No. 2500548 carton, containing two 2-1/2 gal. (9.5 liter) bottles
or Part No. 2500546 containing 5 gal. (19 liters), pail.
IV - Capacity: 3qt. (2.8 l) 50/50 water ethylene glycol mix.
V - Capacity 2 Quarts 80W-90 gear lube with 5 oz. of limited slip
additive.
Recommended Service and Lubrication Intervals
Every
8-10
Hours
Every
25
Hours
Every
100
Hours
Every
250
Hours
Every
400
Hours
Every
500
Hours
Every
1000
Hours
Yearly See Sec-
tion
Lubricant
Type
Air Filter (Cab)
IR
Air Filter (Engine)
I R**** 4.6
Battery Charge
I4.9
Belts
I-A* I-A R 4., 3.2
Brake
I-A A 3.4
Cooling System
I-C-A R 4.21 IV
Electrical System
I* I 4.15
Engine Oil
IR*R 4.5 II
Engine Oil Filter
R* R
Front Axle
I-A R V
Fuel System
I4.8
Fuel Filter
R4.8
Grease Fittings - All
LLL L 6.2 I
Hydraulic Hoses and Tubes
I*** I 4.12
Hydraulic Oil
I-A R** 4.13 III
Hydraulic Oil Filter (2)
R* R**** 4.14
Muffler and Exhaust
I4.16
Radiator Screens
I-C/AR 4.21
Tires
I-A A 4.17