User Manual

GB
94
SPECIAL
FUNCTIONS
Viewing Images from an External Equipment
INPUT
Use the following procedure to set up the Player for use as a monitor for
viewing images from a VCR or camcorder.
To view images from an external equipment
1 Connect the external equipment using the procedure on page 22.
2 Turn on the external equipment.
3 Turn on the Player.
4 Press INPUT/DVD to enter the INPUT
mode.
5 Press the play button of the external equipment.
Power is not supplied from the Player to a connected camcorder.
When not using the Player with external equipment, be sure to disconnect all
cables from the video input/output and audio input/output terminals.
The Player goes into the Standby mode when no video signal is input for about 5
minutes in the INPUT mode.
OPERATE
TITLE
MENU
SETUP
ZOOM
PROGRAM DISPLAY VIEW MODE
DVD VIDEO PLAYER
RETURN
VIDEO ADJ.
ENTER
SHIFT
FUNCTION
VOLUME
+
INPUT
/DVD
LCD ON/OFF