User Manual

SETTING UP

Setup

Setting the MPEG

1 While a disc is stopped, press SETUP to display the Setup screen.

2 Use ' or " to select the “ AUDIO SETUP”.

3 Press ENTER and then use ' or " to select “MPEG”.

4 Press ENTER to display the settings you

can select.

5 Use ' or " to select “BITSTREAM” or “PCM”.

BITSTREAM: Use this setting for a digital connection of a receiver

(amplifier) equipped with an MPEG Audio decoder.

PCM: Use this setting for a digital connection to the PCM digital

input jack of a DAT or MD, or for a digital connection to a

receiver (amplifier) that does not have an MPEG Audio

decoder.

6 Press ENTER to confirm the setting.

• To exit the Setup screen and return to the Startup screen, press SETUP

or RETURN.

• When playing a disc recorded using DTS, the bitstream type signal is output

regardless of the setting of “

DIGITAL” and “MPEG”.

AUDIO SETUP

COMPRESSION: ON

MPEG:

PCM

BITSTREAM

DIGITAL: