User Manual

SPECIAL

FUNCTIONS

3 After you have specified all track numbers

you want, press | to move the highlighting

to the next. Then press ENTER to start

play in the sequence you specified.

• Tracks are played in the sequence you specified.

• When entering track numbers that do not exist on the disc in step 2, this

operation is disabled.

• Press RETURN if you want to exit the above screens.

• You cannot program the play sequence while a disc is playing.

• Play sequence programming does not work with a disc that does not include

track information.

• Play sequence programming does not work with a disc that disables

programming. The indicator ø is displayed when playing back such discs.

• Play sequence programming does not work immediately after you load a disc into

the Player. It can be used only after the disc has been played, even if only

partially.

To stop programmed play

1 Press Ë (STOP).

• The number you input is not stored in memory if there is no corresponding

track number on the disc. Make sure you input track numbers correctly.

• If you input the wrong number, press \ and then re-input.

• To exit the programming procedure part way through, press RETURN.

Programmed Playback

PROGRAM

VCD