User`s guide

112 NET.CFG Parameters
MX1 Reference Guide E-EQ-MX1RG-D
Initialize_365
Determines whether to initialize the Intel 82365SL PCMCIA controller chip.
Valid: Y, N
Default: Y
Inactivity_min
Sets the number of minutes of inactivity before the PC card goes to sleep. To minimize draw on
the vehicle battery, set this to 0.
Valid: 0 through 20 minutes
Default: 0
Inactivity_sec
Sets the number of seconds of inactivity before the PC card goes to sleep. Valid settings are 0
through 55 (values above 5 are rounded to the nearest multiple of 5). To minimize draw on the
vehicle battery, set this as low as possible, preferably to 1.
Valid: 0 through 55 seconds
Default: 1
Channel
Sets the channel to be used when the PC card is acting as the master.
Valid: 1 through 15
Default: 1
Subchannel
Sets the subchannel to be used when the PC card is acting as the master.
Valid: 1 through 15
Default: 1
Mac_optimize
Optimizes the PC card for the number of concurrent modes.
Valid: 0 (light) or 1 (normal)
Default: 1
Roam_config
Sets the roaming speed.
Valid: 0 (slow), 1 (normal) or 2 (fast)
Default: 1