User`s guide

118 NET.CFG Parameters
MX1 Reference Guide E-EQ-MX1RG-D
Symbol Parameters
The following is a list of parameters that can be modified in the NET.CFG file. To set the TCP/IP
parameters see the SOCKET.CFG file documentation.
Link Support
Parameter used to define resources for the LSL.COM file. Any modifications may cause resource
conflicts.
Protocol
Instructs TCP/IP stack to bind to radio driver.
ESS_ID
Identifies the 802.11B wireless network the station will connect to. The ESS_ID is a string of 1 to
31 case sensitive characters. Spaces may be included by using quotes.
Default: “LXE”
mode
IO mode required if using card and socket services.
Default: IO
ioaddress
Sets the I/O address location.
Default: 300
memory
Sets the resource memory location.
Default: CC00
interrupt
Sets the interrupt (IRQ) line to be used.
Default: 5
performance_index
Configures whether the Symbol 4121 series radio will perform power management.
Valid: 0=CAM Constant Awake Mode
1=Power Management On
Default: 1