User`s guide

Startup Problems 139
E-EQ-MX1RG-D MX1 Reference Guide
Copy File
12. When the DOS prompt appears, type
SYS C:
and press <Enter>.
13. Type
Type C:\AUTOEXEC.BAT
and press <Enter>.
If your AUTOEXEC.BAT file contains a COMSPEC command, confirm that it
identifies the correct location for COMMAND.COM (i.e. the C:\ directory).
Please refer to commercially available DOS User’s Guides for complete
instructions or troubleshooting when using these DOS files or
commands.
14. Type
Type C:\CONFIG.SYS
and press <Enter>.
If your CONFIG.SYS file contains a SHELL command, confirm that it identifies the
correct location for COMMAND.COM (the C:\ directory).
15. Power off the MX1.
16. Remove the DOS boot SRAM card.
17. Replace the endcap.
18. Power on the MX1.