User`s guide

16 Endcaps
MX1 Reference Guide E-EQ-MX1RG-D
Plain Endcap
Figure 1-14 Plain Endcap
The Plain Endcap is used when other endcap options are not
selected. It provides a seal against dirt and moisture for the
top of the computer case. The endcap is designed for IP65
environments (with an installed radio).
Scanner Endcap Indicators
Read all cautions, warnings and labels before using the scanner endcaps.
1. Laser On Indicator
2. Beeper
3. Good Read Indicator
Figure 1-15 Scanner Endcap LEDs and Beeper
The left LED (1 - Laser On Indicator) on the top of the laser barcode endcap will light, indicating
laser emission when the laser beam is being emitted. Following a good read, the right LED (3 -
Good Read Indicator) flashes, indicating a successful scan. Beeps may be heard after a good read,
depending on the application running on the MX1.
The laser automatically turns off after a successful read and is ready to scan again when the Scan
key (or the trigger) is pressed.