User`s guide

Physical Controls 31
E-EQ-MX1RG-D MX1 Reference Guide
Power Status and the Status LED
Figure 2-3 Power Status and the Status LED
The Status LED is located next to the LXE logo on the MX1. The LED changes color and state
depending on power status.
Status LED Condition
Off MX1 is Off.
OR
The MX1 is powered On and the display is On.
Steady Green
The MX1 is powered On and the display is Off. Press any key to turn the
display On.
Blinking Green
The MX1 is in the Suspend state. Tap the Power key to exit the Suspend
state. Hold the Power key down for 4 beeps to turn the MX1 off.
Steady Red
Main Battery Low Warning or Low Main Battery. Replace the main
battery, place the unit in a powered charging station or attach a portable
charger.
Blinking Red
Main Battery Power Failure or the Main Battery is depleted, the MX1 is in
Critical Suspend. The MX1 is drawing power from the backup battery.
Replace the main battery or place the unit in a powered charging station.
The MX1 will turn off in 5 minutes (default) (or the value selected in
BIOS Setup for the Off Timer limit) if no action is taken.
Power Management and the
Keypad
Status LED is Steady Green. When the MX1 is in the Display Off state, any keypress returns the
computer to the On state and the display activates. The key pressed (key value) is not sent to the
Operating System or application.
If the 2
nd
, Ctrl, Shift, or Alt keys were active (and the icons were on the display) when the MX1
entered Display Off or Suspend states, the modifier keys and their icons are cleared from the
display when the MX1 wakes up.