User`s guide

52 Single and Multi-Unit Charging Stations
MX1 Reference Guide E-EQ-MX1RG-D
Single and Multi-Unit Charging Stations
Note: An Upper Strap Bracket installation is a requirement prior to using the MX1 in a
Docking Station. The Bracket, as well as the spring clips, helps to secure the MX1 in the
Docking Station cradle. The strap is not a requirement.
LXE offers several docking station configurations. The following figure shows two versions of
stationary powered docking stations. The MX1 and extra batteries are charged in powered
docking stations only. LXE also offers vehicle mounted powered docking stations, table mounted
powered docking stations and a vehicle printer/docking station that charges the MX1 batteries.
Figure 3-4 Multidock and Single Dock Communicating Charger
The Multidock (connected to a local power source) charges the Main Battery in the MX1.
The Single Communicating Charger (connected to a local power source) charges the Main Battery
in the MX1 and a spare Main Battery.
How To Insert MX1 in a Docking Cradle
Figure 3-5 Insert MX1 in Cradle
1. Push the MX1 (with or without the hand trigger-grip) into the cradle “tail first”.
2. Gently push the MX1 down past the spring clips until both click into place over the top of
the MX1.
The MX1 can be removed or inserted with one hand.
For complete installation information for a Multi-Unit Communicating Charger,
please refer to the “2330 Multidock Reference Guide” on the LXE Manuals CD.