User`s guide

56 Installed Software
MX1 Reference Guide E-EQ-MX1RG-D
Software Loaded on Drive C
The software loaded on the MX1 computer consists of BIOS, Card and Socket Services, PCMCIA
card drivers, utilities, DOS 6.22, a protocol stack for 2.4 GHz radio support, radio drivers, and/or
an LXE terminal emulator.
The software supported by the MX1 is summarized below:
LXE Terminal Emulations
Note: Only one LXE terminal emulator can be actively running on the MX1 at any one time
(see Dual TE section for exceptions).
• ANSI Plus 2.4 GHz Terminal Emulator
• ANSI Plus 900 MHz Terminal Emulator
• DOS LDS Plus 900 MHz Terminal Emulator
• DOS LDS Plus 2.4 GHz Terminal Emulator
• DOS IBM 3270 900 MHz Terminal Emulator
• DOS IBM 5250 900 MHz Terminal Emulator
• TN3270 2.4 GHz Terminal Emulator
• TN5250 2.4 GHz Terminal Emulator
Datalight Sockets TCP/IP Stack
Used for 2.4 GHz radio management.
ROM-DOS Version 6.22
DOS Version 6.22 files are loaded in the DOS subdirectory. Only those DOS files required for
optimum performance are loaded on the MX1. Not all DOS 6.22 files are available on the MX1,
but may be added to the flash disk at a later time by the system administrator.
PCMCIA
Used for PCMCIA card management. The following file types are resident in the MX1.
• Socket Services
• Card Services
• PCMCIA SRAM MTD
• PCMCIA ATA MTD
Radio Drivers
Only one radio is installed in the MX1 at any one time. The radio resident on the MX1 determines
the radio card drivers (900 MHz or 2.4 GHz) installed in the MX1.
SNMP DOS Agent
The SNMP DOS agent executable resides in the \AGENT directory. For information on enabling
the SNMP Agent, please refer to the “DOS Autoconfigurator Instructions”. For details on Agent
operation, please refer to the “SNMP Agent Reference Guide”. Both manuals are available in
electronic format on the LXE Manuals CD.