User`s guide

58 Installed Software
MX1 Reference Guide E-EQ-MX1RG-D
\AGENT
The SNMP agent files are loaded on MX1’s with a 2.4GHz radio.
Please refer to the “SNMP Agent Reference Guide” and “Client Configuration
Manager” for more details on the SNMP agent.
AGENT.EXE Diagnostic agent. Provides limited access to the LXE Private MIB.
CFGAGENT.EXE Configuration agent. Provides full access to the LXE Private MIB.
REV.BAT Displays software revision level.
\PCMCIA Files
Please refer to
“PCMCIA Card Management and LXE DOS Computers User’s Guide” on
the LXE Manuals CD and on the LXE website
, for complete instructions or
troubleshooting when using these files.
CISDUMP Permits user to list and interpret contents of a PC Card’s Card Information
Structure (CIS) for debug use.
CNFIGNAM.EXE Driver that specifies which PC configuration should be accessed from the
PCM.INI file. This file is added to the CONFIG.SYS file.
DPMS.EXE Novell driver that provides memory management services.
PCM.EXE DOS-based utility for reviewing, modifying, or creating PC Card
configurations.
Note: May or may not be present.
PCM.INI Stores PCMCIA configuration parameters.
PCMATA.SYS Device driver for ATA–IDE hard disk emulation. Used with SRAM cards,
rotating disk cards, or solid-state mass storage cards. This file is added to
the CONFIG.SYS file.
PCMCS95.EXE Card Services (driver), the operating-system–level program that manages
all PCMCIA cards. This file is added to the CONFIG.SYS file.
PCMFDISK.EXE Edits partition table for ATA PC Cards.
PCMRMAN.SYS Device driver that reads Card Services resources, passes data to Card
Services which then makes device allocations. This file is added to the
CONFIG.SYS file.
PCMSCD.EXE Device driver for FAX/Modem and LAN cards. This file is added to the
CONFIG.SYS file.
PCMSS.EXE Socket Services (driver), the BIOS–level program that functions as the
interface between the card socket and the Card Services program.