User`s guide

Installed Software 65
E-EQ-MX1RG-D MX1 Reference Guide
;The adapter needs 32 16-bit I/O ports, and 1 non-sharable IRQ.
;The following lines should be uncommented and the appropriate
;values set in the following scenarios:
; 1) PCMCIA mode: Override the I/O port base and/or IRQ
; assigned by PCMCIA card services.
; 2) PCMCIA mode: PCMCIA card services is not being used.
; 3) ISA mode: Override the I/O port base and/or IRQ assigned
; by Plug and Play.
; 4) ISA mode: Non-Plug and Play operation.
;PortBase 140
;IRQ 5
;If the PCMCIA interface is being used without PCMCIA card
; services, uncomment the following lines and set the appropriate
; values.
Memory CC000
Socket 1
;If the PCMCIA interface is not being used, set the appropriate
;value of "ISA" or "PCI".
BusType "PCMCIA"
Frame ETHERNET_II
; Frame ETHERNET_802.3
; Frame ETHERNET_802.2
protocol IPX 0 ETHERNET_II
show dots=on
Symbol 4121 11Mb Radio
NET.CFG File
See Chapter 6, “RF Network Configuration”, for explanations of NET.CFG
parameters.
; 1. A semicolon as the first non blank character denotes a
; comment line.
; 2. Commented out parameter lines create the default setting.
; 3. Rate control only works with 2 Mbps (or greater) radios
; 4. Encryption controls only work with 2Mbps (or greater)
; radios
; 5. ESSID must be changed to reflect the local network.
link support
Buffers 4 1550
Protocol ODIPKT
Bind s11odi
link driver s11odi
frame ethernet_II
; frame ethernet_802.2
; The ESS_ID can be a string of 1 to 32 case sensitive characters.
ess_id 101
station_name