User`s guide

BIOS Setup 71
E-EQ-MX1RG-D MX1 Reference Guide
BIOS Setup
Be very careful when using this utility to modify BIOS Setup parameters. The MX1 may
generate unexpected results when incorrect or conflicting parameter values are entered. The
parameters should only be modified by Information Services personnel or the system
administrator.
Note: Make sure there is a fully charged battery in the MX1 before accessing BIOS Setup.
Accessing the BIOS Setup
When you turn the MX1 on the unit will start to boot programs from the Internal Flash Array
(IFA). If the Main Menu Setup Msg parameter is toggled On, watch the bootup sequence and
when the following is displayed:
Press F2 to Enter Setup
Press the [F2] key. When the Main Menu Setup Msg parameter is toggled Off (default), the [F2]
key is still available during the bootup sequence. The next screen displayed is the BIOS Setup
Main Menu.
BIOS Setup has three menus: Main, Advanced and Exit.
BIOS Setup Default Values by Option
Menu Option Menu / Section Default Value
Boot Main A: then C:
Caps Advanced / Keyboard Off
COM1 Pin 9 Advanced / Other RI
CPU Advanced / Power Mgt Aggressive
CtlAltDel Advanced / Keyboard Reboot
Date Main 09/02/1988
Disp. BL Advanced / Power Mgt Timed
Disp. BL Advanced / Power Mgt 3 s
Display Advanced / Power Mgt 15 s
Docked PM Advanced / Power Mgt PM Disabled
DOS Font Advanced / Other 8x16
NumLock Advanced / Keyboard On
Off Timer Advanced / Power Mgt 5 m
POST Msg Main Disabled
Power Key Advanced / Power Mgt Susp-Off
Power Mgt Advanced / Power Mgt On
Rpt Delay Advanced / Keyboard 0.5 s
Rpt Rate Advanced / Keyboard 10 /s
Setup Msg Main Off
Summary Main Off
Suspend Advanced / Power Mgt 5 m
Time Main 00:00:00
Settings are saved temporarily as each parameter activity screen is closed. Changes are saved to CMOS
RAM when Exit With Save is selected and the BIOS setup program closes.
Changed parameter values will take effect when the MX1 reboots upon exiting BIOS Setup. If the MX1
does not automatically reboot upon exit, please reboot the MX1.