User`s guide

BIOS Setup 83
E-EQ-MX1RG-D MX1 Reference Guide
Rpt Rate
The Rpt Rate parameter sets the number of times a keystroke will be repeated, per second, as the
key is depressed.
Values: 2 to 30 chars per second
(2, 6, 10, 15, 20, 30)
Default: 10 chars per second
CtlAltDel
This parameter determines whether the user can restart the MX1 by pressing the reboot key
sequence: CTRL+ALT+DEL.
When this parameter is No Reboot, the reboot key sequence will have no effect.
Values: Reboot, No Reboot
Default: Reboot
Other
When changes have been made, press an arrow key to go to another parameter or menu or press
ESC to go to the Exit Menu.
Font
The Font parameter selects the screen display font size.
Note: This font size choice may be overridden by an application.
Values: 8x8
8x16
Default: 8x16
COM1 Pin9
This option is used to configure the serial port COM1. The MX1 COM1 port is the endcap port –
scanner, RS-232, plain and scanner/RS-232 combination.
Values: RI (Ring Indicator)
5V
Default: RI
Note: This setting is overridden by the BIOS when a scanner, plain, or scanner/RS-232
combination endcap is present. This setting should be changed to 5V by the user when an
RS-232 endcap is installed.