Operation Manual

48 www.sharp.co.uk/support
DVD Setup
Setting the CINEMA VOICE
This function raises the sound of the centre speaker to make the
voices in a movie easier to hear.
• Before setting the “CINEMA VOICE”, perform steps 1 and 2 from
pages 45 to 46.
1 Press ENTER and then use ' or " to select “CINEMA VOICE”.
2 Press ENTER to display the settings you can select.
3 Use ' or " to select “ON” or “OFF”.
ON: Set to “ON” when you want to raise the sound of
the voice.
OFF: Set to “OFF” when you do want to use this
function.
4 Press ENTER to confirm the setting.
5 When you have completed the setting above, press RETURN to
return to the SETUP screen. However, if you want to go on and
specify other settings, use ' or " to display other setting
screens.
• The CINEMA VOICE setting raises the sound of the centre
channel. It does not affect the voices in other channels.
• Even if this function is set to “ON”, the results may or may not
be effective, depending on the disc.
/
OPEN/
CLOSE
OPERATE
VCR/ DVD
SELECTOR
VCR MENU
DVD SETUP
TAPE
SPEED
ON
SCREEN
TIMER
ON/OFF
TITLE
DVD MENU
DISPLAY
VIDEO Plus+
EJECT
FUNCTION
CONTROL
PROG/
REPEAT
ANGLE
CLEAR
RETURN
REV FWD
SET
ENTER
ZERO BACK
SKIP SEARCH
TV/VCR
VCR DVDAM/PM
INPUT SELECT
PAUSE/STILL
REC
VCR/DVD COMBINATION
PLAY
STOP
SLOW
CH
VCR DVD
SKIP
DPSS
AUDIO
OUTPUT
RRMCGA069WJSA
AUDIO
CINEMA VOICE
ON
OFF
DVNC65H043_048.pm6 30/8/02, 11:39 am48