Operation Manual

63www.sharp.co.uk/support
Immediate Recording
Selection of a Channel
Select the channel you wish to record by using the number buttons,
or select the next/previous channel by pressing CH ' / ".
To change between single digit and 2-digit channel numbers, press
- / --. For example, for channel 24, press - / -- then press 2 and 4.
Tape Speed Selection
Your Unit has three tape speeds: SP (Standard Play), LP (Long Play)
and EP (Extended Play). Press TAPE SPEED to select the desired
setting.
It is recommended that EP recordings are only played back on the
Unit on which they were originally recorded.
You can record the channel you are watching or a different channel.
Immediate Recording
1 Insert a video tape into your Unit.
2 Select the channel you wish to record on the Unit as above.
3 Press
ÆÆ
ÆÆ
ÆREC to start recording.
4 Press âPAUSE/STILL to pause during recording.
5 Press
ÆÆ
ÆÆ
ÆREC to continue recording.
6 Press ËSTOP once to stop recording.
Simple Timed Recording
1 Press
ÆÆ
ÆÆ
ÆREC.
2 To specify a stop time, each additional press of
ÆÆ
ÆÆ
ÆREC will delay
the stop time by 10 minutes.
3 Press ËSTOP once to stop recording at any time.
TV Program Recording
/
OPEN/
CLOSE
OPERATE
VCR/ DVD
SELECTOR
VCR MENU
DVD SETUP
TAPE
SPEED
ON
SCREEN
TIMER
ON/OFF
TITLE
DVD MENU
DISPLAY
VIDEO Plus+
EJECT
FUNCTION
CONTROL
PROG/
REPEAT
ANGLE
CLEAR
RETURN
REV FWD
SET
ENTER
ZERO BACK
SKIP SEARCH
TV/VCR
VCR DVDAM/PM
INPUT SELECT
PAUSE/STILL
REC
VCR/DVD COMBINATION
PLAY
STOP
SLOW
CH
VCR DVD
SKIP
DPSS
AUDIO
OUTPUT
RRMCGA069WJSA
• If the tape ends before the recording is
complete the Unit will stop recording,
rewind, eject the tape and place the
Unit into STANDBY mode.
• If the Unit ejects the video tape when
you press
ÆÆ
ÆÆ
ÆREC the tape is record
protected. i.e. record protection tab has
been removed.
G STOP 15:30
E-240
CASSETTE
MODE
SP
(Standard Play)
240 min.
LP
(Long Play)
EP
(Extended Play)
480 min.
720 min.
DVNC65H063_070.pm6 30/8/02, 11:50 am63