Operation Manual

65www.sharp.co.uk/support
6 If you wish to change the recording speed, use
\\
\\
\ /
||
||
| to highlight
SP. Press ' / " to select standard play (SP), long play (LP) or
extended play (EP) as required.
1/2
DATE PR START STOP
21/06 02 12:00
AM 13:00 PM
/ : :
/ : :
/ : :
SP/LP/EP:TAPE SPEED
:SELECT
SET :ENTER MENU:EXIT
:CHANGE
SP
7 For VPS/PDC setting use
\\
\\
\ /
||
||
| to highlight the final column (See
NOTE below). Using ' / " will select VPS/PDC “ON” or “OFF”.
(✽ = ON – = OFF).
1/2
DATE PR START STOP
21/06 02 12:00
AM 13:00 PM
/ : :
/ : :
/ : :
VPS/PDC *:ON -:OFF
:SELECT
SET :ENTER MENU:EXIT
:CHANGE
SP
8 Press SET to confirm the programme. The VIDEO Plus+ system
menu will reappear. If you wish to enter further VIDEO Plus+
system recordings repeat this procedure.
MENU
PLUSCODE NO.
ONCE WEEKLY DAILY
:SELECT 0~9 :DATA
SET :ENTER MENU:EXIT
9 When you have completed entering the timer settings, press
VCR MENU to remove the menu from the TV screen.
10 Ensure that the tape on which you wish to record is inserted into
the Unit, then press TIMER ON/OFF once to place the Unit in
TIMER STANDBY mode.
GG
GG
G will be shown on the VCR Front
Panel Display and the timer standby indicator will be illuminated.
Timer Recording
/
OPEN/
CLOSE
OPERATE
VCR/ DVD
SELECTOR
VCR MENU
DVD SETUP
TAPE
SPEED
ON
SCREEN
TIMER
ON/OFF
TITLE
DVD MENU
DISPLAY
VIDEO Plus+
EJECT
FUNCTION
CONTROL
PROG/
REPEAT
ANGLE
CLEAR
RETURN
REV FWD
SET
ENTER
ZERO BACK
SKIP SEARCH
TV/VCR
VCR DVDAM/PM
INPUT SELECT
PAUSE/STILL
REC
VCR/DVD COMBINATION
SLOW
CH
VCR DVD
SKIP
DPSS
AUDIO
OUTPUT
RRMCGA069WJSA
PLAY
STOP
• You may also access the VIDEO Plus+ system menu by the following procedure:
1 Press VCR MENU.
2 The VIDEO Plus+ system option will be highlighted. Press SET to confirm.
Continue from step 2 of this procedure.
• VPS/PDC is a signal broadcast by some TV stations which adjusts the start and stop time of your Unit recording. This
ensures that if there is a change in broadcast time for your programme the Unit will still record the whole programme.
It is essential that the start time as it appears in the TV listing is used to program the Unit, as this information is used to
identify the VPS/PDC signal corresponding to your programme.
• If the
GG
GG
G symbol and the red indicator light flashes a video tape has not been inserted into the Unit.
• If the video cassette is ejected when the Unit tries to record the record protection tab has been removed.
• During recording, press ■STOP to cancel the recording. If there are further recordings to be made, the Unit will return
to Timer Standby.
DVNC65H063_070.pm6 30/8/02, 11:50 am65