Operation Manual

68 www.sharp.co.uk/support
Timer Recording
11 Press SET to confirm.
• The MENU now shows all the timer settings you have entered.
If you wish to make additional timer recordings, repeat this
procedure.
12 When you have completed entering timer settings, press VCR
MENU to remove the menu from the TV screen.
13 Ensure that the tape on which you wish to record is inserted into
the Unit, then press TIMER ON/OFF once to place the Unit in
TIMER STANDBY mode.
GG
GG
G will be shown on the VCR Front
Panel display and the timer standby indicator will be illuminated.
• If problems persist contact the SHARP Helpline on tel: [phone]
(office hours)
• VPS/PDC is a signal broadcast by some TV stations which adjusts the
start and stop time of your VCR recording. This ensures that if there is
a change in broadcast time for your programme the Unit will still
record the whole programme. It is essential that the start time as it
appears in the TV listing is used to program the Unit, as this informa-
tion is used to identify the VPS/PDC signal corresponding to your
programme.
• If the symbol and the red indicator light flashes a video tape has not
been inserted into the Unit.
• If the video tape is ejected when the Unit tries to record the record
protection tab has been removed.
• During recording, press ËSTOP to cancel the recording. If there are
further recordings to be made, the Unit will return to Timer Standby.
How to Check, Change, and Cancel a Delayed Recording
Checking a Recording
You can see on the Timer setting screen a list of all timer
programmes that are already set.
Preparations
• If the Timer Standby symbol
GG
GG
G appears on the VCR Front Panel
Display, press the TIMER ON/OFF to remove the
GG
GG
G symbol.
1 Press ËSTOP to switch on the VCR.
2 Press VCR MENU.
3 Press ' / " to select “TIMER”. Press SET to confirm.
• All the delayed recordings in the VCR’s memory will be shown.
MENU
VIDEOPLUS+
TIMER
MODE
SET UP
:SELECT
SET :ENTER MENU:EXIT
4 If the settings are correct press VCR MENU to exit.
/
OPEN/
CLOSE
OPERATE
VCR/ DVD
SELECTOR
VCR MENU
DVD SETUP
TAPE
SPEED
ON
SCREEN
TIMER
ON/OFF
TITLE
DVD MENU
DISPLAY
VIDEO Plus+
EJECT
FUNCTION
CONTROL
PROG/
REPEAT
ANGLE
CLEAR
RETURN
REV FWD
SET
ENTER
ZERO BACK
SKIP SEARCH
TV/VCR
VCR DVDAM/PM
INPUT SELECT
PAUSE/STILL
REC
VCR/DVD COMBINATION
PLAY
STOP
SLOW
CH
VCR DVD
SKIP
DPSS
AUDIO
OUTPUT
RRMCGA069WJSA
DVNC65H063_070.pm6 30/8/02, 11:50 am68