Operation Manual

72 www.sharp.co.uk/support
Use the following procedure to record the images and sounds on a
DVD disc onto a video cassette.
Recording a DVD disc onto a video cassette
(Tape Editing mode)
Preparation
TV
• Turn on the TV and switch to the external “VIDEO” or “AV” channel.
This Unit
• Press OPERATE.
• Move the VCR/DVD CHANGE Switch on the Remote to DVD.
1 Insert both the DVD disc and the video cassette for recording.
2 Press VCR
\\
\\
\ DVD.
• The VCR
\\
\\
\ DVD indicator on the product lights up.
• The channel has changed to DVD playback picture and the
product enters the REC PAUSE mode.
3 Press ON SCREEN to turn off the DVD on screen display (see
page 51).
• If the DVD on screen display is “ON” while recording, the
display will also be recorded.
4 Press ûPLAY.
• The disc starts playback
5 Press æREC.
• The images on the DVD disc are recorded onto the VCR
cassette.
6 To stop the Tape Editing mode, first move the VCR/DVD
CHANGE Switch to VCR and press the ËSTOP button to stop
the VCR. Then move the selector switch to DVD and press
ËSTOP to stop the DVD.
Recording a DVD Disc onto a Video Cassette
/
OPEN/
CLOSE
OPERATE
VCR/ DVD
SELECTOR
VCR MENU
DVD SETUP
TAPE
SPEED
ON
SCREEN
TIMER
ON/OFF
TITLE
DVD MENU
DISPLAY
VIDEO Plus+
EJECT
FUNCTION
CONTROL
PROG/
REPEAT
ANGLE
CLEAR
RETURN
REV FWD
SET
ENTER
ZERO BACK
SKIP SEARCH
TV/VCR
VCR DVDAM/PM
INPUT SELECT
PAUSE/STILL
REC
VCR/DVD COMBINATION
PLAY
STOP
SLOW
CH
VCR DVD
SKIP
DPSS
AUDIO
OUTPUT
RRMCGA069WJSA
AV 2 IN VDEO
OPEN/CLOSE
OPERATE
EJECT/STOP
REW
PLAY/X2
REC
CH
VCR/DVD
SELECTOR
TIMER
VCR DVD
PLAY
STOP
LINE IN 3 VIDEO L - AUDIO - R
/
DV-NC65
DVD / CD PLAYER
PAL
PLAY
OPERATE
VCR DVD indicator
• The following are not signs of trouble:
1 The brightness of images from regular DVD disc playback and from discs played in Tape Editing mode might vary.
2 The discs playing time and the Real time counter vary slightly when recording.
• While in Tape Editing mode it is not possible to adjust timer settings to use Exact Rec function.
• The DVD/VCR output jacks become VCR fixed.
• The following operations cancel the Tape Editing mode:
1 When stopped or performing other tape operations except for recording or pause.
2 When changing channels.
3 When pressing VCR \ DVD once more or turning the power on or off, after setting the Tape Editing mode.
• Copy protected DVD discs cannot be recorded (the image will be distorted when æREC is pressed).
• Discs that can be recorded onto tape are DVD discs that are not copy protected, and Audio CD-R and CD-RW (CD-R
or CD-RW are limited to those recorded in Audio CD format).
The recordings which you make from TV/radio broadcasts or audio sources (such as records) are for your
own private use and cannot be used without prior permission or consent of the author.
DVNC65H071_072.pm6 30/8/02, 11:52 am72