Operation Manual

89
www.sharp.co.uk/support
Programmed Playback
The two types of programmed playback provided by this Unit are
chapter programmed playback (DVD discs) and track programmed
playback (audio CD MP3 recorded on CD-R/RW).
DVD
DVD
/
OPEN/
CLOSE
OPERATE
VCR/ DVD
SELECTOR
VCR MENU
DVD SETUP
TAPE
SPEED
ON
SCREEN
TIMER
ON/OFF
TITLE
DVD MENU
DISPLAY
VIDEO Plus+
EJECT
FUNCTION
CONTROL
PROG/
REPEAT
ANGLE
CLEAR
RETURN
REV FWD
SET
ENTER
ZERO BACK
SKIP SEARCH
TV/VCR
VCR DVDAM/PM
INPUT SELECT
PAUSE/STILL
REC
VCR/DVD COMBINATION
PLAY
STOP
SLOW
CH
VCR DVD
SKIP
DPSS
AUDIO
OUTPUT
RRMCGA069WJSA
Chapter Programmed Playback
1
Press PROG twice while the disc is stopped.
• The “DVD-VIDEO PROGRAM” screen appears.
• Press PROG to return to the normal screen.
2 Press ' or " to select the desired title and then press ENTER.
• The chapter selection screen appears.
3 Press ' or " to select the desired chapter and press ENTER.
• The chapter is programmed in the playlist.
• Repeat the above step for each of the chapters that you want
to play as part of the program.
• To delete the chapter programmed in the playlist, follow the
steps below:
1 Press | to move the cursor to the playlist.
2 Press ' or " to select the program (chapter) you
want to delete and then press RETURN.
• To delete all programmed chapters, move the cursor to the
playlist and then press RETURN for more than two seconds.
4 Press ûPLAY to begin playing the programmed chapters.
• The chapters will be played in the order they were entered.
• The PROGRAM indicator lights up on the DVD Front Panel
display.
5 Press
ËË
ËË
ËSTOP to stop programmed playback.
• To start programmed playback again, follow the steps below:
1 Press
ËË
ËË
ËSTOP to stop programmed playback.
2 Press PROGRAM.
3 Select the title you programmed and press ENTER. (If
other titles are selected, the previously entered program
will be cleared.)
4 Press ûPLAY.
MEMORY
SELECT
ENTER
DVD-VIDEO PROGRAM
TITLE
1
2
3
START
SELECT
DVD-VIDEO PROGRAM
: 2 : 2
1 1:
2 2:
3 3:
4:
5:
6:
RETURN
START
SELECT
DVD-VIDEO PROGRAM
: 2 : 2
1 1: 3
2 2: 1
3 3:
4:
5:
6:
RETURN
• Up to 24 chapters can be programmed.
• Press RETURN to return to the previous
screen.
• The program cannot be set during the
normal playback.
• This function can only be used for DVD
discs on which the chapter has been
recorded.
• On some discs in which programmed
playback is prohibited, this function is
disabled.
DVNC65H088_090.pm6 30/8/02, 12:08 pm89