User Manual

VCR FUNCTIONS
–
16
–
EN
Quick-Find
This function enables you to search and confirm the contents of the
recorded programme(s) using the index mark.
• The tape must be fully rewound.
To skip to the beginning of next programme
1.
To view at normal speed
1.
The Quick-Find is cancelled.
Hint
• This function will not operate in the Recording mode.
• When you want to cancel the Quick-Find while in progress, press
STOP C.
• When the end of a tape is reached during the Quick-Find, the
tape will automatically rewind to the beginning. After rewinding
finishes, the VCR/DVD will eject the tape.
Auto Return
When all timer recording is finished, the VCR/DVD will automatically
rewind the tape to the beginning where it started recording.
If there are any remaining programmes including Daily, Everyday and
Weekly, Auto Return will not operate.
1.
Select “SET UP”.
or
To decide.
MENU
TIMER
B SET UP
INITIAL
2.
Select “AUTO RETURN”.
or
SET UP
B AUTO RETURN [OFF]
AUTO REPEAT [OFF]
PICTURE [NORMAL]
3.
SET UP
B AUTO RETURN [ON]
AUTO REPEAT [OFF]
PICTURE [NORMAL]
4.
To exit the Auto Return.
To watch the Recorded Timer Programme
Press TIMER ON/OFF to cancel the timer standby mode. Then, select
VCR mode by pressing VCR on the remote control. Press PLAY B.
RECORDING
Recording & OTR (One Touch Recording)
This function enables you to set the duration of a recording simply by pressing REC/OTR.
Before: Turn on the TV and select an appropriate external input mode on the TV until the VCR/DVD's picture appears.
VCR/DVD COMBINATION
NA527AD
1 2 3
6
54
7
0
+10
8 9
STOP
PLAY
VCR
DVD
press first.
PULL OPEN
DV-NC200
OPERATE
OPEN/CLOSE
VCRCH
TIMER
RECPLAYREW FF
STOP/
EJECT
(TRACKING)
1
5
2
4
You CANNOT copy a DVD to a videotape if
the DVD disc is copy protected.
NA545FD
3
4
2
5
2
erase-protection tab
VCR/DVD COMBINATION
NA527AD
1 2 3
6
54
7
0
+10
8 9
STOP
PLAY
VCR
DVD
press first.
VCR/DVD COMBINATION
NA527AD
1 2 3
6
54
7
0
+10
8 9
STOP
PLAY
VCR
DVD
press first.
Refer to page 7 to switch between the VCR mode and the DVD mode.
1.
XJUIFSBTFQSPUFDUJPOUBC
• If necessary, rewind or fast
forward the tape to the point
at which you want to begin
recording.
Insert a tape.
2.
Select the desired channel.
or
P12
TV Screen
3.
SP
Tape Speed SP Mode
Recording / Playback TimeTape Type
LP Mode
E-60 1 hour 2 hours
E-120 2 hours 4 hours
E-180 3 hours 6 hours
E-240 4 hours 8 hours
Select the desired tape speed.
4.
I
SP
/PSNBMSFDPSEJOH
3&$

You can select a fixed recording time by
pressing REC/OTR repeatedly.
• Recording stops when 0:00 is reached.
• To check remaining time during an OTR, press DISPLAY.
• To change the recording length during an OTR, press REC/OTR
repeatedly until the desired length appears.
• To cancel the OTR but continue recording, press REC/OTR repeatedly I
appears without the recording length.
5.
To stop recording or before the end time of OTR, press STOP C.
C
Assemble Function
You can record in continuation from previous programme on a pre-
recorded tape.
1. Insert a pre-recorded tape. Press PLAY B to start playback.
2. Press STILL/PAUSE F at the desired point on the tape.
3. Press REC/OTR. The VCR/DVD will be the Recording Pause mode.
4. Press CH K / L to select the channel to be recorded.
5. Press REC/OTR or STILL/PAUSE F. The recording will begin.
6. Press STOP C when recording is completed.
Accidental erasure prevention
To prevent accidental recording on a
recorded cassette, remove its erase-protection tab.
To record on it later, cover the hole with
plastic tape.
To stop recording temporarily (Pause mode)
Press STILL/PAUSE F.
• During the Recording Pause mode, 5
C marks appear on the TV
screen. Each C mark represents 1 minute. After 5 minutes, the VCR
will automatically switch to the stop mode to prevent tape damage.
• Press it again to resume recording.