User Manual
SETUP
–
6
–
EN
DVD Output Mode
1. Lights up when the A-B repeat function is on.
2. Lights up when the ALL repeat function is on.
3. Lights up when the inserted disc comes to a pause.
4. Lights up when playing back in slow mode (DVD or Video CD).
5. Lights up when the inserted disc is being played back.
6. Lights up when the repeat function is on.
7. Displays how long the current title or track has been played back.
When a chapter or track is switched, the number of a new title,
chapter or track is displayed.
8. Displays a type of the disc which is inserted on the tray.
• DVD : DVD
• CD : Audio CD, MP3, JPEG, Kodak Picture CD
• VCD : Video CD
9. Lights up when the progressive scan system is activated.
VCR Output Mode
1. *Lights up when a tape is in the VCR/DVD.
2. Lights up during playback when the repeat function is on.
3. Lights up when the playback is in still or slow mode.
4. Lights up when the inserted cassette is being played back.
5. Works as a tape counter (hour, minute, second). Also displays a
channel number, tape speed, remaining time for OTR or current
time.
6. *Lights up when the Timer Recording or an OTR recording has
been set.
7. *Lights up during a recording. Flashes when a recording is paused.
* , and mark will disappear when you set VCR/DVD in DVD
mode. However, the function indicated by each mark is still working.
12 3 4 5 6 7
SETUP
FUNCTIONAL OVERVIEW
Front Panel
1. Disc Tray
2. PLAY (DVD)
To begin disc playback.
3. STOP (DVD)
To stop playback.
4. DVD OUTPUT Indicator
The indicator is on when this VCR/DVD is in the DVD mode.
Make sure that this indicator is on before using the DVD player.
5. OUTPUT
To select the DVD mode or VCR mode.
6. VCR OUTPUT Indicator
The indicator is on when this VCR/DVD is in the VCR mode.
Make sure that this indicator is on before VCR operation.
7. OPEN/CLOSE (DVD)
To open or close the disc tray.
8. CHANNEL
To change TV channels.
To adjust the tracking manually during VCR playback.
9. Display
10. Remote Sensor
11. TIMER Indicator
The indicator is on when the VCR/DVD is in timer standby mode
for a Timer Recording or during a One Touch Recording.
12. REC (VCR)
Press once to start recording or repeatedly to start One Touch
Recording. The indicator is on during recording.
13. PLAY (VCR)
To begin tape playback.
14. STOP/EJECT (VCR)
To stop playback.
To eject the tape in the stop mode.
15. FF (VCR)
To fast forward the tape.
16. REW (VCR)
To rewind the tape.
17. Cassette Compartment
18. AUDIO IN Jacks (AV3 / VCR only)
Connect an audio cable coming from the audio out jacks of a
camcorder, another VCR, or an audio source here.
19. VIDEO IN Jack (AV3 / VCR only)
Connect a video cable coming from the video out jack of a cam-
corder, another VCR or an audio-visual source (laser disc player,
video disc player, etc.) here.
20. OPERATE
To turn the VCR/DVD on or off.
The indicator is on when this VCR/DVD is turned on.
Display
PULL OPEN
DV-NC200
OPERATE
OPEN/CLOSE
PLAYSTOP
DVDVCRCH
TIMER
RECPLAYREW FF
STOP/
EJECT
(TRACKING)
OUTPUT
17 51516 1012 8111314 6 49 3 218 171920