Service manual

DV-NC70U/C

DV-NC72U

8-4-2 CARES WHEN REASSEMBLING

INSTALLING THE CASSETTE HOUSING

When the cassette housing is installed on the mechanism,

the initial setting is essential condition.

There are two initial setting methods, namely electrical and

mechanical.

1. Electrical initial setting

So as to perform initial setting of mechanism execute the

Step 1 of Installation of cassette housing. After ascertaining

the return to the initial setting position install the cassette

housing. (Conditions: When mechanism and PWB have

been installed)

8-4-1 DISASSEMBLING THE MECHANISM

1. When removing the mechanism from the set.

Remove the two screws 1 which connecting mechanism

and main frame.

Take out vertically the mechanism so that it does not

damage the adjacent parts.

2. Removing the mechanism and cassette housing.

Remove the two screws 2 fixing the cassette housing

to the mechanism, and remove the cassette housing.

Pinch Drive Cam

Synchro Gear

Master cam

Main Chassis

Drive Lever

8-4. DISASSEMBLY AND REASSEMBLY

Cassette Control

Housing

Mechanism

Chassis

Main PWB