Service manual

DISASSEMBLY INSTRUCTIONS
B1-2
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
Remove the 2 screws 1.
Remove the Deck Shield in the direction of arrow (A).
Remove the 6 screws 2.
Disconnect the following connectors:
(CP504, CP1703, CP8301,CP8302, CP8303).
Remove the Deck CD Block in the direction of arrow (B).
Remove the 4 screws 3.
Remove the MPEG Shield in the direction of arrow (C).
Disconnect the following connector: (CP4001).
Remove the DVD/HD MPEG PCB in the direction of
arrow (D).
Remove the 2 screws 4.
Remove the DVD Angle (L) in the direction of arrow (E).
Remove the 2 screws 5.
Remove the DVD Angle (R) in the direction of arrow (F).
1-3: DECK CD AND DVD/HD MPEG PCB
(Refer to Fig. 1-3)
1-4: POWER PCB (Refer to Fig. 1-4)
1.
2.
3.
4.
5.
6.
Remove the 2 screws 1.
Disconnect the following connector: (CP506).
Remove the Fan Motor in the direction of arrow (A).
Remove the 3 screws 2.
Disconnect the following connector: (CP1701).
Remove the Power PCB in the direction of arrow (B).
Fig. 1-4
1-5: VCR DECK (Refer to Fig. 1-5)
Do not remove the cable at the FE Head section. The FE
Head may be damaged if you remove the cable by force.
NOTE
1.
2.
3.
4.
5.
6.
7.
Unlock the 2 supports 1 and remove the Top Holder.
Remove the screw 2.
Remove the FE Head.
Move the Cassette Holder Ass’y to the back side.
Remove the 3 screws 3.
Disconnect the following connectors:
(CP101, CP102, CP3001).
Remove the AC Head Cover and VCR Deck in the
direction of arrow.
Fig. 1-5
1
VCR Deck
FE Head
AC Head Cover
3
1
Top Holder
2
3
3
1
Power PCB
1
Bottom Plate
Fan Motor
(B)
2
(A)
2
2
1
1
Fig. 1-3
(A)
2
Deck Shield
2
2
2
2
Deck CD
(B)
3
3
2
3
5
5
DVD/HD MPEG PCB
(C)
MPEG Shield
DVD Angle (L)
(D)
DVD Angle (R)
4
4
3
(E)
(F)
Bottom Holder