Manualshelf

Troubleshooting guide

ManualsBrandsSharp ManualsDVD PlayerDV-S1
12345678910
TV (with external input jacks)
RL
AUDIO
IN
S-VIDEO
INPUT
AUDIO cable
(supplied)
S-VIDEO cable
(commercially available)
To ANALOG
AUDIO OUT jacks
To S-VIDEO
OUT jack
(White)
(Red)
(White)
To AUDIO input
jacks
To S-VIDEO
input jack
(Red)
TV (with external input jacks)
RL
AUDIO
IN
VIDEO
IN
(Red)
(White)
(Red)
(White)
(Yellow)
(Yellow)
AUDIO cable
(supplied)
VIDEO cable
(supplied)
SCART output
adaptor (supplied)
To VIDEO input
jack
To VIDEO output
jack
To AUDIO input
jacks
To AUDIO output
jacks
To EURO
AV1
(
TV
)
OUT terminal
• You will not be able to hear all of the sound being output by the VCR/DVD if you use the AUDIO cable (supplied) to a
monaural TV that has only one AUDIO input jack.
NOTES:
• Be sure that the colours of the jacks and plugs match up when connecting the cable.
• Connect the VCR/DVD directly to the TV. If you attempt to view video on a TV connected via a VCR, the copy protection
function will scramble the picture.
• If you want to listen to the audio through audio equipment, connect only the S-VIDEO or VIDEO cable to the TV.
Connecting to a TV Equipped with S-
VIDEO Input Jack (DVD only)
If your TV has no SCART input jack but has an S-VIDEO
input jack, use a commercially available S-VIDEO cable to
connect from the VCR/DVD to the TV. You will still need the
SCART cable or Round coaxial cable for VCR features. (S-
VIDEO connection is available only in DVD mode.)
Connecting to a TV Equipped with
RCA type Input Jack
If your TV has RCA type audio and video input jacks, you
may connect to EURO AV1 (TV) OUT terminal through the
SCART output adaptor (supplied). When using this connec-
tion, do not connect a decoder to the EURO AV2
(DECODER) terminal of your VCR/DVD. Other equipment,
such as a VCR or camcoder, can be connected to EURO
AV2 (DECODER) terminal. If the connected equipment has
RCA type audio and video input jacks, use a SCART input
adaptor (commercially available).
–
10
–
EN
CAUTION:
• Be sure to turn off the VCR/DVD and equipment to be connected before connecting.
• Read through the operation manual for the equipment to be connected.
• Be sure to keep the VCR/DVD connection cables separate from the TV antenna cable when you install the VCR/DVD,
because it may cause electrical interference when you are watching television programmes.
• DTS audio cannot be produced with an analogue connection.
SETTING UP YOUR VCR/DVD COMBINATION
Connecting to a TV or a stereo TV
DVD
DIGITAL
AUDIO OUT
ANALOG
AUDIO OUT
S-VIDEO
OUT
L
R
VCR AV2 (DECODER)
AV1 (TV)
DVD/VCR
AERIAL
RF OUT
To AERIAL
jack
To SCART
terminal
Round coaxial cable
(supplied)
SCART cable
(commercially available)
from Antenna
(TV)
To RF OUT
jack
To EURO AV1 (TV)
OUT terminal
CAUTION:
• Connect the VCR/DVD directly to the
TV. Do not connect the VCR/DVD to a
VCR, then connect the VCR to the TV.
Copyright protection in the VCR could
distort the picture playing on the
VCR/DVD.
VCR/DVD
VCR
TV
H9744RD(EN).qx4 04.7.2 19:29 Page 10
Downloaded from www.Manualslib.com manuals search engine
Downloaded From DvDPlayer-Manual.com Sharp Manuals