User Manual

–
12
–
EN
Getting started
• Turn on the power of the TV, amplifier and any other com-
ponents which are connected to the DVD.
• Make sure the TV and audio received (commercially avail-
able) are set to the correct channel.
• When you play NTSC disk, the NTSC signal will convert
to a modified PAL signal.
Press OPERATE.
•“P-ON” will appear briefly on the display panel.
Press OPEN/CLOSE to open disc loading tray.
Place the chosen disc in the tray, with the label
facing up.
Press PLAY.
• Playback starts automatically.
Press STOP to stop playback.
NOTE:
• DVDs may have a region code. Your DVD player will not
play discs that have a region code different from the
region code of your DVD player.
5
4
3
2
1
CDDVD
Press MENU.
• The DVD’s main menu will appear.
If a title menu is no available, symbol may
appear on the TV screen.
If disc menu is available on the disc, audio lan-
guage, subtitle options, chapters for the title and
other options will appear for selection.
Press Arrow ( L / K / B / s ) to select an item, and
ENTER to confirm selection.
4
3
2
1
DVD
DVD OPERATION
Basic Playback
Disc menus
DVDs may contain menus to navigate the disc and access
special features. Press the appropriate numerical key or use
Arrow ( L / K / B / s ) to highlight your selection in the DVD
menu and press ENTER to confirm.
NOTE:
• Unless stated, all operations described are based on
remote control use. Some operations can be carried
out using the menu bar on the TV screen.
General Features
Press TITLE.
• The title menu will appear.
If a title menu is no available, symbol may
appear on the TV screen.
Press Arrow ( L / K / B / s ) to select an item, and
ENTER to confirm selection.
• Playback will begin at the selected Title.
3
2
1
DVD
During playback, press PAUSE.
• Playback will pause and sound will be muted.
To continue playback, press PLAY.
2
1
CDDVD
Title Menu
Pause