Specifications

10
S-Video
SD Component
The corresponding input port name display on OSD menu will disappear once
setting “OFF”.
De-interlacing Mode* 4
AFM
: Auto Film Mode
TNR
: Temporal Noise Reduction
MADI
: Motion Adaptive De-interlacing
LADI
: Low Angled De-interlacing
Auto Power :
OFF / ON
ON – Enable soft power off function if absence of input signals
OFF – Disable soft power function
Video Standard (SD)* : Auto / NTSC / NTSC 4.43 / PAL / PAL M / SECAM
Image Orientation : Normal / Horizontal flip / Vertical flip / Rotate
Gamma : 1.0 / 1.6 / 2.2
OSD 4
OSD position :
H POS
: Move the OSD menu image horizontally
V POS
: Move the OSD menu image vertically
OSD Timeout (sec) : ON – 60 : Adjust the OSD menu timeout period in a step of 5
seconds (max 60 seconds)
ON =
Continuous to display OSD menu.
60 = 60 seconds later will turn off the OSD menu.
Language : English / Chinese : Select OSD menu language display
Transparency : ON / OFF : Set OSD transparency
Freeze : Freeze the image (use “+” button)
Zoom 4
Zoom level :
: Enable the zoom in function on the image displayed.
Use “+” button to zoom in the image
Use “-“ button to decrease the zoomed image
Horizontal pan :
: Pan the image horizontally
Vertical pan :
: Pan the image vertically
Default : Restore to default values
Note : Freeze state will be cleared when you using zoom function.
Color Temperature 4
5000K
6500K
8000K
9300K
User setting :
USER Red :
USER Green :
USER Blue :
Default : Resume to the default values
Hot Key 4
Hot key 1 : Volume / Brightness / Contrast / Input / Zoom / Freeze / Aspect / PIP Size / PIP
Swap / Image Orientation
Hot key 2 : Volume / Brightness / Contrast / Input / Zoom / Freeze / Aspect / PIP Size / PIP
Swap / Image Orientation
Monochrome Mode 4
- Color
- Red Monochrome
- Green Monochrome
- Blue Monochrome
Reset to Factory Defaults
* : DISPLAY IN VIDEO MODE ONLY
# : DISPLAY IN ARGB MODE ONLY
## : DISPLAY IN ARGB / HD COMPONENT MODE ONLY
Firmware V0.36.00