Specifications

27
SPECIFICATIONS
Panel compatibility Compatible with 1920x1200, 1920x1080, 1680x1050, 1600x1200, 1440x900
1366x768, 1280x1024, 1024x768, 800x600 & 640x480 resolutions of TFT LCD
panels.
A specified BIOS and some factory adjustment may be required for individual panel
timings.
No. of colours Up to 3 x 8 bit providing 16.7 million colours.
Panel power DC 3.3V, 5V, 12V, 18V
Panel signal TTL / LVDS
Vertical refresh rate 60Hz at 1920x1200, 60Hz at 1920x1080, 60Hz at UXGA and up to 75Hz other
lower resolution
Display clock maximum 165MHz
ADC clock maximum 195 MHz
DVI differential input clock maximum 165MHz
Graphics formats Standard VESA VGA, SVGA, XGA, SXGA, WXGA, UXGA, WUXGA
Other special formats through specified BIOS and factory adjustment.
Graphics auto mode detect VGA, SVGA, XGA, SXGA, WXGA, UXGA & WUXGA interlaced and non-interlaced
Standard input at source (analog RGB) VGA analog (15 pin) standard with automatic detection of:
Digital Separate Sync;
Composite Sync
Sync On Green.
Video formats PAL, NTSC & SECAM
Video inputs ARGB
DVI-D
Composite video 1
Composite video 2
S-Video
S-Video 2
SD Component video (YCbCr)
SD Component video 2 (YCbCr)
HD Component (YPbPr)
HD-SDI
HD-SDI 2
Functions display On screen display (OSD) of functions
OSD menu functions Image controls:
Panel brightness/contrast, Saturation, Hue, Color temperature, Sharpness, Video
Scaling, PIP, OSD position, OSD timeout, Image orientation, Auto Source Seek,
etc.
OSD menu controls available Power On/Off
Backlight brightness
OSD Menu
OSD Select up
OSD Select down
Setting +
Setting -
Control interface Buttons, RS-232, Remote control
Settings memory Settings are stored in non volatile memory
PC Connectivity VGA / SVGA / XGA / SXGA / UXGA / WUXGA analog or digital
Controller dimensions 179mm x 120.4mm (7.” x 4.74”)
Power consumption 10w approx. (not including panel power consumption)
Power load maximum The controller has an overall 3Amp current limit.
Input voltage 12V/24VDC +/- 5%
Power protection Fuse fitted (Resettable)
DC Power handling Reverse power polarity protection is equipped on the board
Storage temperature limits -40
o
C to +70
o
C
Operating temperature limits 0
o
C to +60
o
C
NOTES
Please note the following:
• For specific panel setup a sample of an LCD may be required (this will be returned) and a copy of the full
technical specifications for the panel from the manufacturer.
• Re-layout and custom development services are available.