Specifications

37
"1" - Successful.
Custom Sizing 0xef,
“0” | “1” | “2”
”?”
Custom sizing selection :
Overscan / Normal / Custom
Query
“0” – Overscan
“1” – Custom
“2” – Normal
3. Other control
Function Command Description Acknowledge (if enabled)
Select RS-232
acknowledge
0xc1, “0” | “1” Disable/enable command
acknowledge.
“0” – acknowledge disabled.
“1” – acknowledge enabled.
Auto-setup 0xc3 Start auto-setup of current
vmode.
“0” – fail.
“1” – successful.
Command
availability
0xc4, nn Check whether a command is
available.
“0” – not available.
“1” – available.
Auto-calibration 0xc5 Start auto-calibration of gain
of the RGB amplifier.
“0” – fail.
“1” – successful.
Freeze frame 0xc6, “0” | “1” Unfreeze / freeze frame “0” – unfreeze.
“1” – freeze.
Soft Power On/Off 0xc8,
“0” | “1” |
“?”
Soft power
off/on
query
“0” – Turn off the LCD power and
backlight. Turn off memory
controller, Power down DVI
Power down ADC, Power
down Fclk PLL
“1” – Turn on the unit
Query video input
status
0xc9 Query the status of the
primary & pip status
“nn,nn” = input status
“nn,xx” digit = primary status:
“0”,”0” : invalid
“A”,”1” ARGB
“B”,”1” Composite
“B”,”2” Composite2
“C”,”1” S-video
“C”,”2” S-video2
“D”,”1” SD Component
“D”,”2” SD Component2
“E”,”1” HDSDI
“E”,”2” HDSDI2
“F”,”1” DVI
“G”,”1” HD Component 1
“xx,nn”= PIP input status:
“0”,”0”: invalid
“A”,”1” ARGB
“B”,”1” Composite
“B”,”2” Composite2
“C”,”1” S-video
“C”,”2” S-video2
“D”,”1” SD Component
“D”,”2” SD Component2
“E”,”1” HDSDI
“E”,”2” HDSDI2
“F”,”1” DVI
“G”,”1” HD Component
Reset parameter 0xce Reset all parameters to
default value
“1” – successful.