DVD Video Player MODEL DV-SL10S(Y) OPERATION MANUAL DVD / CD / VIDEO CD PLAYER OPERATE OPEN/CLOSE PLAY STOP SKIP REW FWD The region number for this DVD player is 2. 2 NTSC/PAL Please read this Operation Manual carefully before using your DVD Video player.
SAFETY INFORMATION This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC as amended by 93/68/EEC. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. Dieses Gerät entspricht den Anforderungen der EGRichtlinien 89/336/EWG und 73/23/EWG mit Änderung 93/68/EWG. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY.
SAFETY INFORMATION Location and Handling Service • Do not attempt to service this Player yourself. Please refer any service to the nearest service centre approved by SHARP. • • • • Do not cover or place the player in enclosed spaces to prevent excessive temperature build up. Do not place the Player in direct sunlight, or near heat sources. Keep the Player away from strong magnetic objects. Do not place any object containing water or other liquids on the Player.
FEATURES ¡Dolby Digital sound ¡On-screen display This player can handle Dolby Digital surround sound having 5.1 channels when connected to a Dolby Digital decoder.
TABLE OF CONTENTS ■ SAFETY INFORMATION. . . . . . . . . . . . . . . . . . . . . . . . 2 ■ FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 ■ INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Symbols Used in this Manual. . . . . . . . . . . . . . . . . . . . . 5 Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . 5 ■ ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Playable Discs . . . . . . . . . . . . . . . .
ABOUT THE DISCS Playable Discs The following discs can be played back on this DVD player. ¡DVD video ¡DVD-R/RW* ¡Audio CD ¡CD-R/RW* ¡MP3* ¡Video CD *Depending on the types or the writing method of the medium some discs can not be played. • Some DVD-R/RW, or CD-R/RW discs made on personal computers, or on DVD recorders may not be played back properly due to the factors such as scratches, dirt or special properties of the disc.
FUNCTIONAL OVERVIEW 1 FRONT PANEL 2 3 4 5 6 7 8 9 OPERATE OPEN/CLOSE PLAY STOP SKIP REV FWD REAR VIEW R DIGITAL AUDIO OUT 11 12 L AV (TV) VIDEO S-VIDEO VIDEO OUT 13 14 15 10 1. OPERATE to switch the player to ON or OFF 2. OPEN/CLOSE to open/close the disc tray 3. PLAY to start or resume disc playback 4. STOP to stop playback 5. SKIP H / REV h goes to previous chapter or track during playback; press and hold for 1.5 seconds for a reverse search 6.
FUNCTIONAL OVERVIEW Display Stays on when repeat chapter function is on. Stays on when repeat track function is on. Stays on when repeat title function is on. Stays on when the repeat function is on. Lights up when a DVD is inserted on the tray. Stays on when the A-B repeat function is on. Stays on when the inserted disc is being played back. Lights up when the inserted disc comes to a pause. CD: Lights up when a CD is inserted on the tray. VCD: Lights up when a Video CD is inserted on the tray.
SETTING UP YOUR DVD PLAYER If your TV has two SCART sockets DVD Player R L DIGITAL AUDIO OUT AV (TV) VIDEO S-VIDEO VIDEO OUT To AV OUT SCART VCR SCART OUTPUT SCART Cable (commercially available) To SCART output TV SCART Cable (commercially available) To SCART input To SCART input NOTE: • • The player is continuously outputting the RGB and the VIDEO (COMPOSITE) signal. Select either (RGB or COMPOSITE) signal on your TV side. Some TV can recognize the RGB signal automatically.
SETTING UP YOUR DVD PLAYER Connecting to Audio Equipment Connecting the Player to audio equipment provides normal stereo sound. Playing 2 channel audio C Analogue audio connection (Red) To AUDIO OUT jacks (White) R L DIGITAL AUDIO OUT DVD Player AV (TV) VIDEO S-VIDEO VIDEO OUT AUDIO cable (commercially available) Amplifier of stereo system, etc.
CONNECTIONS - TV, VCR, DIGITAL SET TOP BOX - AND DVD PLAYER Back of TV DVD PLAYER R DIGITAL AUDIO OUT L AV (TV) VIDEO S-VIDEO VIDEO OUT SCART Cable (commercially available) AV/TERMINAL (AV-2) Satellite dish Aerial AV/TERMINAL (AV-1) Euro-SCART (RGB) Aerial IN Aerial Lead (commercially available) SCART Lead (commercially available) Back of VCR RF OUT Audio/Video Aerial IN Aerial Lead Aerial Lead (commercially available) (commercially available) Dish Lead SCART Lead (commercially availab
PLAYING A DISC Basic Playback DVD General Features CD DVD-RW Getting started • • • VCD VR mode Turn on the power of the TV, amplifier and any other components which are connected to the DVD. Make sure the TV and audio receiver (commercially available) are set to the correct channel. When you play NTSC recorded discs the default setting converts this to a modified PAL (see page 19 “Display Settings”). 1 Press OPERATE. • “P-ON” will appear briefly on the display panel.
PLAYING A DISC Title Menu Resume / Stop DVD DVD symbol may appear on the TV screen. 3 Press Arrow ( L / K / B / s ) to select an item, and ENTER to confirm selection. • Playback will begin at the selected Title. DVD-RW at which playback was stopped. • To cancel resume, press STOP again. • To stop playback, press STOP twice from playback mode. NOTE • Some Video CDs with PBC function resume playback from the beginning of the track. Press MENU to call up the DVD main menu.
PLAYING A DISC Fast Forward / Reverse Search DVD CD MP3 DVD-RW Zoom VCD DVD VR mode 1 During playback, press FWDg or REVh repeated- ly to select the required forward or reverse speed: x2, x8, x50, x100. • If you are using FWD g or REV h on the front panel, press and hold it for more than 1.5 sec (the longer you hold it, the faster the speed will be). When you reach the desired speed, release the button.
PLAYING A DISC Title / Chapter Search Repeat DVD • REPEAT are available only during playback. DVD-RW VR mode REPEAT TITLE / CHAPTER 1 Press DIRECT SKIP once for the Chapter search, twice for the Title search during playback. DVD DVD-RW VR mode To activate the repeat function, press REPEAT during playback. • The repeat mode changes as described below every time you press the button. /2 2 Enter the desired chapter/title number using the numerical key pad.
PLAYING A DISC Programme MP3 Playback MP3 CD When a CD with MP3 files is inserted in the DVD player, the MP3 menu will appear on the TV screen, and number of tracks is displayed on the front panel. 1 In stop mode, press K or L to select the desired You may determine the order in which tracks will play. 1 Press MODE (playback must first be stopped). • The PROGRAM screen will appear. 2 Press ▲ or ▼ to select a group or track.
PLAYING A DISC Track Selection Stereo Sound Mode MP3 1 Press DIRECT SKIP during playback. • The FILE LIST will appear. 2 Select a desired track using Arrow (L/K/B/s). • Press B when you want to go to the next hierarchy. • Press s when you want to go back to the previous hierarchy. 3 Press PLAY to start playing VCD 1 Press AUDIO repeatedly during playback to select between STEREO, L-CH or R-CH.
PLAYING A DISC Changing the On-Screen Display DVD Marker Setup Screen DVD-RW DVD CD VR mode You can check information about the current disc by pressing ON SCREEN on the remote control. 1 Press ON SCREEN during playback to show current Chapter. 9/49 0:00:00 -0:00:00 • The elapsed and remaining playing time of the current chapter will be displayed. 2 Press ON SCREEN again to show current Title. • The elapsed and remaining playing time of the current title will be displayed.
DVD SETUP Audio Setting Parental Control Choose the appropriate settings for best sound reproduction dependent on your externally connected equipment. These settings only affect DVD audio playback. 1 Press SETUP in STOP mode. 2 Press B to select (CUSTOM), then press ENTER. • On screen menu will appear. 3 Press B to select Parental Control prevents disc being viewed that exceed the set limit, unless a password is used.
DVD SETUP Display Setting Language Setting You can change certain aspects of the DVD display screens, on-screen messages and the display panel on the front of the DVD player. 1 Press SETUP in STOP mode. 2 Press B to select (CUSTOM), then press Language options are not available with some discs. 1 Press SETUP in STOP mode. 2 Press B to select (CUSTOM), then press ENTER. • On screen menu will appear. 3 Press s or B to select (LANGUAGE), then ENTER. • On screen menu will appear. press ENTER to confirm.
DVD SETUP Language Code A-B Abkhazian Afar Afrikaans Albanian Amharic Arabic Armenian Assamese Aymara Azerbaijani Bashkir Basque Bengali;Bangla Bhutani Bihari Bislama Breton Bulgarian Burmese Byelorussian C-E Cambodian Catalan Chinese [CHI] Corsican Croatian Czech Danish [DAN] Dutch [DUT] English [ENG] Esperanto Estonian F-H Faroese Fiji Finnish [FIN] 4748 4747 4752 6563 4759 4764 5471 4765 4771 4772 4847 5167 4860 5072 4854 4855 4864 4853 5971 4851 5759 4947 7254 4961 5464 4965 5047 6058 5160 5161 5166
TROUBLESHOOTING GUIDE If the DVD player does not perform properly when operated as instructed in this Operation Manual, check the player, consulting the following checklist. Problem Solution –Check if the AC power cord is properly connected. –Check if the TV is switched on. –Check the video connection. Distorted picture –Sometimes a small amount of picture distortion may appear. This is not a malfunction. Completely distorted picture or –Connect DVD player directly to the TV.
SPECIFICATIONS PRODUCT TYPE DVD Player CONNECTIONS AUDIO/VIDEO DISCS (PLAYBACK COMPATIBILITY) DVD Video (Region code 2, Europe/Japan) Audio CD Video CD CD-R/RW DVD-R/RW S-Video output Analog audio output Coaxial digital audio output POWER SOURCE 220-240 V ~ +/- 10%, 50 Hz +/- 0.
SHARP CORPORATION Osaka, Japan 9HS0VMN03707 E57B3ED ★★★★