Troubleshooting guide
–
13
–
EN
During playback, press STILL/PAUSE.
• Playback will pause and sound will be muted.
To continue playback, press PLAY.
2
1
VCDDVD-RWMP3CDDVD
Pause
Getting started
• Turn on the power of the TV, amplifier and any other com-
ponents which are connected to the DVD.
• Make sure the TV and audio receiver (commercially avail-
able) are set to the correct channel.
•
When you play NTSC recorded discs the default setting con-
verts this to a modified PAL (see page 19 “Display Settings”).
Press OPERATE.
•“P-ON” will appear briefly on the display panel.
Press OPEN/CLOSE to open disc
loading tray.
Place the chosen disc in the tray,
with the label facing up.
Press
PLAY.
• The tray will close automatically, and
playback will then start from the first chapter or track of
the disc. If the playback does not start automatically,
press PLAY.
• When you playback the DVD which a title menu is
recorded, it may appear on the screen. In this case,
refer to “TITLE MENU”.
Press STOP to stop playback.
NOTES:
• A “prohibited icon” may appear at the top-
right on the TV screen during operation,
warning that a prohibited operation has
been encountered by the DVD player or the disc.
• With DVDs that use some titles for playback pro-
gramme signals, playback may start from the second
title, or it may skip these titles.
• During the playback of two layered disc, pictures may
stop for a moment. This happens when the 1st layer
switches to the 2nd layer. This is not a malfunction.
• A DVD-RW disc recorded in the VR mode may freeze
momentarily during playback depending on how the playlist
was made and edited (deleted titles, repeated recording).
5
4
3
2
1
VCDDVD-RWCDDVD
Press MENU.
• The DVD main menu will appear.
If the feature is not available, symbol may
appear on the TV screen.
If disc menu is available on the disc, audio lan-
guage, subtitle options, chapters for the title and
other options will appear for selection.
Press
Arrow ( L / K / B / s ) to select an item, and
ENTER to confirm selection.
4
3
2
1
DVD
PLAYING A DISC
Basic Playback
Disc Menus
DVD or video CDs may contain menus to navigate the disc
and access special features. Press the appropriate numerical
key or use
Arrow ( L / K / B / s ) to highlight your selection
in the DVD main menu and press ENTER to confirm.
NOTE:
• Unless stated, all operations described are based on
remote control use.
Cancelling PBC* (for playback of a Video CD)
Insert a Video CD. (Playback will start automatical-
ly.)
Press
STOP.
Enter track number of your choice with the
numeri-
cal key pad.
PBC is now cancelled and the playback of the
Video CD will start.
*
What is PBC?
“PBC” stands for the PlayBack Control. You can play interac-
tive software using a menu screens. Refer to instructions of
Video CD.
4
3
2
1
General Features
Press TITLE.
• The title menu will appear.
If the feature is not available, symbol may
appear on the TV screen.
Press
Arrow ( L / K / B / s ) to select an item, and
ENTER to confirm selection.
• Playback will begin at the selected Title.
• Press
MENU to call up the DVD main menu.
• Press TITLE to call up the title menu.
The title menu will appear.
Press the
numerical key pad to select the menu.
Playback will start.
NOTE:
• Contents of menus and corresponding menu opera-
tions may vary between discs. Refer to the manual
accompanying the disc for details.
2
1
VCD
3
2
1
DVD
Title Menu
CALLING UP A MENU SCREEN DURING
PLAYBACK
VR mode
VR mode
E57B1BD.QX3 03.5.16 2:53 PM Page 13
Downloaded from www.Manualslib.com manuals search engine
Downloaded From Disc-Player.com Sharp Manuals