Troubleshooting guide

–
15
–
EN
PLAYING A DISC
A-B REPEAT
Press A-B REPEAT at your chosen starting point.
• A- appears briefly on the TV screen.
Press A-B REPEAT again at your chosen end
point.
• A-B appears briefly on the TV screen, and the repeat
sequence begins.
To exit the sequence, press A-B REPEAT .
NOTES:
• The A-B REPEAT section can only be set within the
current title (for DVDs), or current track (for audio CDs).
• A-B REPEAT is not available with some scenes in DVD.
• To cancel the A point which was set, press CLEAR.
• A-B REPEAT playback does not function during title,
chapter, track or all repeat playback.
3
2
1
VCDDVD-RWCDDVD
NOTES:
• The REPEAT setting will be cleared when moving to other track .
• Repeat playback does not function during A-B REPEAT
playback.
• Repeat playback is not available when you play the Video CD
with PBC function.
To activate the repeat function, press REPEAT during play-
back.
• The repeat mode changes as described below every time
you press the button.
VCDCD
REPEAT TRACK
TRACK ALL OFF
(current track repeat) (entire disc repeat)
(repeat off)
VR mode
To activate the repeat function, press REPEAT during
playback.
• The repeat mode changes as described below every time
you press the button.
DVD-RWDVD
NOTES:
• Repeat Title/Chapter is not available with some scenes.
• The REPEAT setting will be cleared when moving to
other title or chapter.
Repeat
REPEAT TITLE / CHAPTER
• REPEAT are available only during playback.
CHAPTER TITLE OFF
(current chapter repeat) (current title repeat)
(repeat off)
VR mode
There are three ways to begin playback on an Audio CD or
Video CD at a specific Track.
Using the numerical key pad
Press the numerical key pad to enter the desired
Track number.
• Playback will start at the selected track.
• For single digit tracks (1-9), press a single number (eg.
track 3, press 3).
• To play track 26, press +10, 2, 6 on the numerical key
pad.
Using the DIRECT SKIP
Press DIRECT SKIP.
• The track search display appears.
Within 30 seconds, select a desired track number
using the
numerical key pad. For single digits
press “0” first.
• Playback will start at the selected track.
Using the SKIP HG
During playback, press
SKIP
G to move to the next track.
Press it repeatedly to skip subsequent tracks. Press
SKIP
H
to go back to the beginning of the current track. Press it quickly
and repeatedly to go to the previous tracks .
• Track number will appear briefly on the DVD display panel.
• If SKIP is pressed while the playback is paused, the
playback will be paused again after skipping to the next
track.
NOTE:
• SKIP HGare not available when playback is stopped.
2
1
1
VCDCD
Track
Press DIRECT SKIP once for the Chapter search,
twice for the Title search during playback.
Enter the desired chapter/title number using the
numerical key pad.
2
1
DVD-RWDVD
Title / Chapter Search
During playback, press DIRECT SKIP three times
(CD: twice) to display the Time Search on the TV
screen.
Within 30 seconds, enter a desired disc time using
the
numerical key pad.
• Playback will start at the specified time.
2
1
VCDDVD-RWCDDVD
Time Search
/2
VR mode
VR mode
without PBC function
without PBC function
without PBC function
E57B1BD.QX3 03.5.16 2:53 PM Page 15
Downloaded from www.Manualslib.com manuals search engine
Downloaded From Disc-Player.com Sharp Manuals