Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. PULL 0 L200 DV-S SHARP CORPORATION 11/17/06, 4:12 PM Downloaded From Disc-Player.
Accessories Please confirm that the following accessories are included. oduct. nsure continued safety, ss to the inside of the D-BY position, mains N/STAND-BY button is t into operation by the remove covers unless tages, always remove ration and when not in Remote control x 1 “AAA” (UM-4, R03, HP-16 or similar) x 2 s appliance to dripping vases, shall be placed ks which must not be yright. Audio / Video cable x 1 Note: Only the above accessories are included.
DV-SL2000W Page ............... 8 - 11 ility .... 12 - 13 ............ 14 - 18 .................... 19 .................... 19 ............ 20 - 24 .................... 25 .................... 26 ) .................. 27 .................... 27 Page Various settings To change the subtitle language ............................................... 34 To change the audio language (audio output) ........................ 34 To change the TV type ...............................................................
a well ventilated area space along the sides, I The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths, curtains, etc. PULL OPEN DV-SL2000 15 cm (6") 10 cm (4") ion. I No naked flame sources, such as lighted candles, should be placed on the apparatus. I Attention should be drawn to the environmental aspects of battery disposal. I This unit should only be used within the range of 5°C - 35°C (41°F - 95°F).
DV-SL2000W wing marks: ntents Types of playable DVD discs vary depending on the region. This unit can play back only DVDs with the same region number as written on the back of the unit. nd video ies) nd video ies) 2 or 3 or 4 Icons used in this operation manual Some functions may not be available depending on discs. The following icons indicate the discs that can be used in the section. ... Indicates DVDs. dio ... Indicates Super video CDs. d picture ... Indicates video CDs. ...
H Icons used on DVD discs Check the icons on the DVD case before playing your discs. Display Description in special formats, etc. 2 nd is heard although can have a negative settings. 3 4 Format recorded on the DVD DVD discs are programmed with region numbers indicating countries in which they can be played. This system can play discs with region number on the back of the unit. To adopt the video format to the connected TVs (“wide-screen TV” or “4:3 size TV”). Recorded in 4:3. play properly.
4 PULL OPEN 5 6 7 8 .
ntinued) H Remote control ~ + , . / : ; < = > ? @ [ \ 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. Reference page Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 26 Chapter (track) Skip Down Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Slow Button . . . . . . . . . . . . . .
nal TV DV-SL2000W R-AUDIO-L System Connections TV with Audio/Video input sockets VIDEO To video input socket (Yellow) urn off the power onnections have OUT sockets of nnect it to the TV yback picture will 8 11/22/06, 2:33 PM Downloaded From Disc-Player.
al TV (continued) e DVD player with the cket connection is not les to the AUDIO OUT of the TV. Using the COMPONENT VIDEO OUT sockets Notes: Please follow the steps before turn on the power. 1. If your TV has the component video input sockets, connect the DVD player to these sockets. (The VIDEO OUT or S-VIDEO OUT socket connection is not necessary.) You can enjoy high quality picture playback. 2.
nal TV (continued) DV-SL2000W rial terminal only, deo cable (supplied) A/V INPUT 1 TV ANT. IN TO TV CHANNEL VIDEO R-AUDIO-L 3 4 4 RF Modulator VHF/UHF AERIAL IN 2 rminal of the RF ween the TO TV N terminal of the 4. Turn on the TV, and set the channel number (CHANNEL 3 or CHANNEL 4) on both TV and RF Modulator, whichever is not used for regular broadcast in your area. Note: For more details, please refer to the instruction manual of the RF Modulator.
al TV (continued) nections To audio input sockets (Red) R 1 (White) L 4 To video input socket (Yellow) socket (Yellow) Audio/Video cable (supplied) A/V INPUT 2 TO TV VHF/UHF FROM ANT. ANT. IN IN CHANNEL VIDEO R-AUDIO-L 3 4 TO TV RF Modulator 5 3 5 4 OUT CHANNEL VHF/UHF AERIAL IN 3 TV he VHF/UHF FROM tween the TO TV OUT e RF Modulator. ) between the TO TV RIAL IN terminal of the VCR 4.
rogressive-scan capability DV-SL2000W nd have component video input capability. R L (White) L DIO INPUT Y Red Blue Green To COMPONENT VIDEO INPUT sockets PB PR COMPONENT VIDEO INPUT To audio input sockets TV with progressive-scan capability System Connections Blue Green *Component video cable (not supplied) *Please consult your local audio/video dealer. sockets of the TV. is not encourage.) to the AUDIO OUT e TV. e page 21) 12 11/22/06, 2:33 PM Downloaded From Disc-Player.
ogressive-scan capability (continued) \ o in two fields, progressive scanning creates one frame in one field. nd with 30 frames (60 fields), but progressive scanning constitutes it with 60 frames from scratch. th high resolution for still image or other picture containing long texts or horizontal lines. stem. ure to turn off the power and disconnect both units from the wall socket until all the connections have been The playback picture will be distorted because DVD video discs are copy protected.
DV-SL2000W TV ayer To VIDEO OUT socket (Yellow) ckets To video input (Yellow) AUDIO VIDEO INPUT 1 *Video cable (supplied) cable ed) (White) L R-AUDIO-L VIDEO To audio input sockets L R Audio System AUDIO INPUT System Connections (White) L TV with Audio/Video input sockets (Red) R em and * Please consult your local audio/video dealer. sure to the wall layback ected. 14 11/22/06, 2:33 PM Downloaded From Disc-Player.
ntinued) Dolby Digital Decoder or DTS Decoder input Amplifier with Dolby Digital Decoder, DTS Decoder or MPEG 2 Decoder Centre speaker Front left speaker Surround left speaker Front right speaker Subwoofer Surround right speaker * Please consult your local audio/video dealer. P”. (See page 21) 11/22/06, 2:33 PM Downloaded From Disc-Player.
ntinued) DV-SL2000W Amplifier with a coaxial digital input Front left speaker ee page 21) Front right speaker * Please consult your local audio/video dealer. System Connections ital audio input 16 11/22/06, 2:33 PM Downloaded From Disc-Player.
ntinued) Dolby Pro Logic Decoder NPUT sockets Amplifier with Dolby Pro Logic Decoder Centre speaker ckets Front right speaker Front left speaker Subwoofer Surround left speaker Surround right speaker * Please consult your local audio/video dealer. 11/22/06, 2:31 PM Downloaded From Disc-Player.
ntinued) DV-SL2000W H Connecting the AC power lead t Wall socket (AC 110-240V, 50/60 Hz) d) 1 2 ayer with the COMPONENT System Connections After checking all the connections have been made correctly, plug the AC power lead of this unit into the wall socket. he AUDIO OUT Note: Unplug the AC power lead from the wall socket if the unit will not be used for a prolonged period of time.
Turning the power on ection indicated in owards the · battery H Test of the remote control Check the remote control operation after making all the connections. Point the remote control directly at the remote sensor on the unit. The remote control can be used within the range shown below: Press the ON/STAND-BY button. Does the power turn on? Now, you can enjoy your system. PULL OPEN 0.2 m - 6 m (8" - 20') time. long periods of time. kage. battery, etc.). on.
DV-SL2000W VIDEO 2”, 1 Press the ON/STAND-BY button to turn the power on. I The startup screen appears. I If the startup screen is blurred, press the PAL / NTSC button repeatedly to change the TV type. Press the SETUP button. Press the 5 or ∞ button to select a menu and press the ENTER button. See the list on pages 21 - 24 for setup menu. 4 Press the 5, 4, 2 or 3 button to change the setting and press the ENTER button. I See the list on pages 21 - 24 for the selectable parameters.
continued) Progressive-Scan onnect it to the COMPONENT VIDEO OUT sockets of the DVD main unit (see page 9), you can select to ogressive-scan.” ates default settings.) Description NGLE ARK ON* OFF SD LANG ENGLISH* CHINESE You can select the desired (On TV Screen Display) language for the setup menu or playback control screen. CREEN AVER ON* OFF A screensaver appears. The screensaver is disabled.
p (continued) DV-SL2000W (* indicates default settings.) Description 4:3 PS* 4:3 LB 16:9 ESOLUTION INTERLACE 576 P/480 P 720 P HDMI* 1080I HDMI UDIO ENGLISH* FRENCH SPANISH Selects the language audible from the speakers. UBTITLE ENGLISH* FRENCH SPANISH OFF Selects the subtitle displayed on the TV screen. ISC MENU ENGLISH* FRENCH SPANISH Selects the disc menu language.
continued) H Language setting Indicator OSD LANG Setting A language for screen display can be set for the setup menu, messages, etc. English Chinese DISC LOADING AUDIO DISQUE CHARGEMENT A language for audio can be set. You can specify a language for conversation and narration. English French Tha SUBTITLE nk y ou Mer A language for subtitle can be set. The subtitles are displayed in a specified language. English French age size depends on isc with this unit conk image is displayed.
p (continued) DV-SL2000W H Password setting ee steps 1 - 3 on ect the parental tons and press From the setup menu, select “PREFERENCES”, “PASSWORD” and then “CHANGE”. A screen appears. -- PREFERENCES PAGE -AUDIO SUBTITLE DISC MENU PARENTAL PASSWORD DEFAULTS PASSWORD CHANGE PAGE OLD PASSWORD: NEW PASSWORD: CONFIRM: CHANGE MAIN PAGE be played back. nd children can children) can be ar requesting a case, enter the 1 Enter the old password using the direct number buttons.
H Adjusting the volume (only ANALOGUE) Press the VOLUME + button to increase the volume and the VOLUME – button for decreasing. 0 1 2 ..... 16 H Muting The volume is muted temporarily when pressing the MUTE button on the remote control. Press again to restore the volume. * TV screen display “MUTE” when press the “MUTE” button. 11/22/06, 2:31 PM Downloaded From Disc-Player.
DV-SL2000W VIDEO 2”, etc. H Playback 1 Press the ON/STAND-BY button to turn the power on. 2 “SHARP” startup screen appears on the TV screen. PULL OPEN 3 Press the 0 (OPEN/CLOSE) button to open the disc tray. 4 Place the disc on the disc tray, label side up. PUL L OPE N Label side 000 SL2 DV- DVD Operation NO DISC Disc tray Be sure to place 8 cm (3") discs in the middle of the disc position. 5 Press the 0 (OPEN/CLOSE) button to close the disc tray.
H To resume playback after stopping (PLAY/PAUSE) button. (resume play) You can resume playback from the point playback is stopped. 1 Whilst a disc is playing, press PRESS PLAY TO CONTINUE the 7 (STOP) button. es after pressing the 7 when the screen saver l. The startup screen The system stores the point you stopped. 2 To restart play, press the 3/8 (PLAY/PAUSE) button. Play resumes from the point you stopped. may accumulate inside To cancel the resume playback: Press the 7 (STOP) button twice.
DV-SL2000W H Fast forward/Fast backward (search) You can search the desired point as you play the disc. 1 Whilst a disc is playing, press the 1 or ¡ button.
d point To play by specifying time (time search): You can play back from the desired point by specifying the time. ress the DIRECT 1 Whilst in the stop or playback mode, press the DIRECT button twice. TITLE 01/11 TIME __:__:__ If the “_ _:_ _:_ _” is not highlighted, press the 2 or 3 button repeatedly. the 2 or 3 butmber using the 2 Specify the time with the DIRECT NUMBER buttons, and then press the ENTER button. TITLE 01/11 I I on after confirm.
DV-SL2000W H Step function (Frame by frame advance Playback) You can advance frame by frame. 1 Whilst a disc is playing, press the STEP button. Each press of the STEP button advances the frame. 2 Press the 3/8 (PLAY/PAUSE) to return to the normal playback. H Slow-motion play You can slow down the playback speed. 1 Whilst a disc is playing, press the SLOW button repeatedly to select the desired speed.
d) H To zoom images (zoom) You can magnify images zoom in and zoom out during playback. 1 Whilst a disc is playing, press the ZOOM button. Each press of the ZOOM button cycles through the zoom setting as follows: ZOOM X 1.5 ZOOM X 2 ZOOM OFF ZOOM X 3 2 To shift the view and display the desired part of a zoomed image, press the 5, ∞, 2 or 3 button repeatedly. To return to normal view: Press the ZOOM button repeatedly to select “ZOOM OFF”.
DV-SL2000W H To play repeatedly (repeat play) You can play a chapter (track) or a title repeatedly by specifying it during playback. When playing SVCD or VCD, cancel the P.B.C. (playback control) (see page 38). Whilst a disc is playing, press the REPEAT button to Repeat 1. TV screen Unit display “CHAPTER REPEAT ON” TITLE TRK PRESET CHP PROG SLEEP A-B KHz REP 1MHz c O VCD MP3 Each time the button is pressed, the repeat play mode changes in the following order.
d) Useful operation (continued) e specified H ng it during playback. You can select the desired subtitle or audio language and sound system [Dolby Digital (5.1ch) or DTS sound] on your DVD if it has a disc menu. button. 1 Unit display PROG SLEEP REPEAT 1 e end point (B). Unit display REPEAT 1 R Whilst in the stop or playback mode, press the MENU/PBC button to display the disc menu. Example 1.Highlights 2.
DV-SL2000W during playback switch the input. page 20). H To change the subtitle language You can change the subtitle language or hide subtitles during playback. Whilst a disc is playing, press the SUBTITLE button repeatedly to se- SUBTITLE 01/05 ENGLISH lect the desired subtitle language. H To change the audio language (audio output) During playback, you can change the audio language (audio output). Whilst a disc is playing, press the AUDIO button repeatedly to select the desired audio number.
) H To change the display on TV screen TSC button You can display or hide the operation indicators on the TV screen. Whilst a disc is playing, press the OSD button. (The display is changed at each press.) DVD: SVCD/VCD/Audio CD: Current title number .
o CD operation Page . . . . . . . . . . . . 28 . . . . . . . . . . . 28 . . . . . . . . . . 30 . . . . . . . . . . . 30 . . . . . . . . . . . 31 . . . . . . . . . . . . 32 repeatedly . . . . . . . . . . . 33 . . . . . . . . . . . 34 . . . . . . . . . . . . 34 . . . . . . . . . . . 37 . . . . . . . . . . . . 35 . . . . . . . . . . . . 39 H Playback of a video CD (super video CD) with P.B.C. ON 1 Press the MENU/PBC button with PBC ON. The menu will appear on the TV and playback will be paused.
CD operation (continued) r automatically. NDOM button on the remote control to begin random play. splay /6 (PLAY/PAUSE) button. DOM button for the second time. splay can move to the track selected next by the random operation. If you press the 4 button will ng of the track being played will be located. acks automatically. (You cannot select the order of the tracks.) C. play. Cancel the P.B.C. mode before using this function on a video CD with P.B.C. ss the 7 (STOP) button.
DV-SL2000W H To start playback from the desired point (direct play) To select and play the desired track: Whilst in the stop or playback mode, press the DIRECT NUMBER buttons to select the track number. TV screen Unit display SELECT: 14 Example: To select track 14: Press “1” at track first digit and “4” at track second digit. Notes: I Direct play feature is disabled on some discs. I Some discs cannot play from the specified point. To play by specifying time (time search): Cancel the P.B.C.
D or VCD operations. Page . . . . . . . . . . . . . . . . 26 . . . . . . . . . . . . . . . . 28 . . . . . . . . . . . . . . . . . 28 . . . . . . . . . . . . . . . . 32 oints repeatedly . . . . . . . . . . . . . . . 33 . . . . . . . . . . . . . . . 36 . . . . . . . . . . . . . . . . 37 . . . . . . . . . . . . . . . . 35 ) . . . . . . . . . . . . .. . . . 38 H To play in the desired order (programmed play) You can playback the desired tracks in a specific order. Maximum of 99 tracks can be programmed.
tion Page . . . . . . . . . . . 26 . . . . . . . . . . . 28 . . . . . . . . . . . 28 . . . . . . . . . . . 30 . . . . . . . . . . 30 . . . . . . . . . . . 30 . . . . . . . . . . . 31 . . . . . . . . . . . 32 edly . . . . . . . . . . 33 . . . . . . . . . . 35 H Playback on the DivX and JPEG menu screen You can play CD-R/RW recorded in the DivX and JPEG formats. 1 Load a disc containing DivX and JPEG files, the menu screen appears. SMART NAVI ... Indicates folders. ... Indicates JPEG data. ...
on (continued) Repeat play on the DivX and JPEG menu screen: Whilst a disc is playing, press the REPEAT button. Each time the button is pressed, the repeat play mode changes in the following order. TV screen Unit display “REP 1” Repeat the currently playing track. “FOLDER REPEAT” “REP ALL” Repeat the currently playing folder (directory). “DISC REPEAT” “REP ALL” Repeat all the tracks. “REPEAT OFF” “No display” Repeat play is cancelled. “REP-ONE” 11/22/06, 2:38 PM Downloaded From Disc-Player.
DV-SL2000W H Rotating a picture “ZOOM ON” You can rotate images. e zoom setting The image rotates as shown below. 3 button : 90˚ rotation in a clockwise direction. ZOOM 200 PCT of a zoomed dly. 2 button : 90˚ rotation in an anti-clockwise direction. utton. utton. 5 button : Horizontal mirror image. ∞ button : Vertical mirror image. CD, CD-R and CD-RW Operation During playback, press the 5, ∞, 2 or 3 button. screen. Note: If press the 2 or 3 button repeatedly, image rotates continuously.
vice operation y device nd video formats. al door. The following playback functions are the same as DVD or VCD operation. Page Fast forward/Fast backward . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Still picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Step function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Slow-motion play . . . . . . . . . . . . . . . . . . . . .
emory device l or 7 button DV-SL2000W Notes: I SHARP will not be held liable for the loss of data whilst the USB memory device is connected to the audio system. he terminal. I This USB memory’s format support FAT 16 or FAT 32. I SHARP cannot guarantee that all USB memory devices will work on this I If recorded file is not displayed in “ROOT” menu, it means that this format is not supported.
s H DTS or Dolby Digital Surround Enjoy DTS or Dolby Digital sound in 5.1 or 2-channel. dts PULL OPEN Whilst a disc is playing, press the AUDIO button repeatedly to select the desired listening mode. 5.1ch surround Unit display sound: Example: DTS the sound quality is n the home theatre TV screen Advanced Feature DTS in DTS is played p DIGITAL PULL OPEN u can enjoy the ecorded in p mplifier/Digital Amplifier 11/22/06, 2:38 PM Downloaded From Disc-Player.
DV-SL2000W efore calling se “0”? connected? any computers V with internal erial. H DVD player Symptom Possible cause Even though a disc has been I Is the disc loaded upside down? I Is the disc very dirty? loaded, “NO DISC” is displayed. Playback sounds are skipped. I Does the disc satisfy the standards? I Is the unit located near excessive vibrations? I Has condensation formed inside the unit? The control buttons do not function. Music or video playback is interrupted.
tinued) H If trouble occurs e cause y respected? ad? gle incorrect? uctions in front of the l sensor exposed to fluorescent light, ? l for another ultaneously? When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction. If such a problem occurs, do the following: 1 Turn the unit power off and on again.
ngs Specifications ns properly, the een. As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. irty and cannot I General e down. Power source DVD is not the e unit.
splay, transmission, public performance and rental (regardless of whether or not such prohibited by law. on technology that causes substantial degradation of images when the contents of a disc e, if the contents of the DVD disc are copied using a VCR, the copy protection code ly. technology that is protected by method claims of certain U.S. patents and other intellectual tion and other rights owners.
MEMO 11/17/06, 4:11 PM Downloaded From Disc-Player.
SHARP CORPORATION 92LYOM20008701 06L R AS 1 11/17/06, 4:12 PM Downloaded From Disc-Player.
