Before you start DVD RECORDER Connections DV-SR45U Getting started OPERATION MANUAL Please read this Operation Manual carefully before using your DVD recorder. Recording INSTRUCCIONES EN ESPAÑOL INCLUIDAS. Playing discs The region number for this DVD recorder is 1.
Before you start Precautions For future reference, record the serial number (located on the rear of the Unit) in the space provided. Model No.: DV-SR45U Serial No.: WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION:TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
Before you start Important Safeguards information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. (Fig.
Before you start Precautions (cont’d) Location and Handling Location and Handling • Do not cover or place the DVD recorder in enclosed spaces to prevent excessive temperature build up. • Do not place the DVD recorder in direct sunlight, or near heat sources. • Depending on the use environment, the temperature of the DVD recorder may increase slightly.This is not a malfunction. • Keep the DVD recorder away from strong magnetic objects. • Do not stand the unit vertically.
Before you start Before you start Precautions (cont’d) Others It is the intent of Sharp that this product be used in full compliance with the copyright laws of the United States and that prior permission be obtained from copyright owners whenever necessary. Connections “Licensed under one or more of U.S. Pat. 4,972,484, 5,214,678, 5,323,396, 5,530,655, 5,539,829, 5,544,247, 5,606,618, 5,610,985, 5,740,317, 5,777,992, 5,878,080, or 5,960,037.
Before you start Table of contents Before you start . . . . . . . . . . . . . . . . . . .2 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . .6 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Functional overview . . . . . . . . . . . . . . . . . . . . . . .8 Installing batteries in the remote control . . . . . . . . .10 Using a remote control . . . . . . . . . . . . . . . . . . . . . .
Before you start Before you start Features This DVD unit not only plays DVDs and CDs but also offers features for you to record to DVD discs and edit them after that. The following features are offered with this DVD recorder. Symbol in this operation manual Many functions of this DVD recorder are depending on the disc type or the recording mode. To specify for what disc type or recording mode each function is, we put the following symbols at the beginning of each item to operate.
Before you start Functional overview Front Panel 2 3 4 5* 6* 7* 1 REC/OTR (*) The unit can also be turned on by pressing these buttons. 8 9 OPEN/CLOSE 15 14 13 12 11 1. 2. 3. 4. 5. 6. 7. POWER button Press to turn the DVD recorder on and off. If timer programmings have been set, press to set the unit in timer-standby mode. CH L / K button Press to change the channel up and down. E (REV) button During playback, press to skip to the previous chapter or track. During playback, press and hold for 1.
Before you start Remote Control POWER 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 PQRS 7 TUV 8 WXYZ 9 SPACE 0 CM SKIP A CH REC MONITOR 4 REC MODE CLEAR 6 8 5 REC PAUSE 7 10 11* 19 G 20 B PLAY FWD h g 21 STOP C TOP MENU 12 MENU/LIST 22 K ENTER REPEAT { B 23 RETURN ZOOM 15 24 L 25 Changing the SETUP menu Others Español 7. REC button Press once to start a recording. Press repeatedly to start a One-Touch timer Recording. 8. PAUSE F button Press to pause play or recording. 9.
Before you start Functional overview (cont’d) Installing batteries in the remote control Using a remote control Install two “AA” size batteries (supplied) matching the polarity indicated inside battery compartment of the remote control. Keep in mind the following when using the remote control: • Make sure that there is no obstacle between the remote control and the remote sensor on the DVD recorder. • Use within the operating range and angle as shown.
Before you start SETUP/DISC/CD menu Press SETUP button to display the setup main menu, then choose either of SETUP/DISC/CD by { / B button. Then, press ENTER button to display each menu. These menus provide entries to all main functions of the DVD recorder. “DISC” is available only when a DVD-RW/R disc is inserted into the unit. When a DVD-Video disc (commercially available), new DVD-R disc, or the finalized DVD-R disc is inserted into the unit, you cannot select “DISC”.
Before you start Functional overview (cont’d) Front Panel Display Guide 4 2 1 3 7 6 5 1. Current status of the DVD recorder : Appears when disc playback is paused. : Appears when playing a disc. : Appears when the timer programming has been set and is proceeding. : Appears during recording process. : Appears during repeat play. 2. Disc type : Appears when an audio CD or a disc with MP3 files is inserted in the disc tray. : Appears when a DVD disc is inserted in the disc tray.
Connections Before you start Connection to a TV Antenna Antenna Cable Signal Cable Signal (Back of TV) AUDIO IN VIDEO (Back of TV) 5 Connect Audio Cable (supplied) Connect Video Cable (supplied) VIDEO L AUDIO Y S-VIDEO 2 PB/CB 2 Connect PR/CR Disconnect INPUT COAXIAL R AUDIO L (L1) VIDEO S-VIDEO Getting started 1 R 3 Connect Round Coaxial Cable (supplied) TV ANTENNA OUTPUT 1 DIGITAL AUDIO OUTPUT PCM / BITSTREAM or 4 Connections or COMPONENT VIDEO OUTPUT (Back of DVD record
Connections Connection to a cable box or satellite box A When connecting to a cable box or satellite box with only a few scrambled channels If you are using a cable box or satellite box with only a few scrambled channels, follow the setup on this page. If many or all the channels are scrambled, use the connection B on this page. With this setup: • You can record any unscrambled channel by selecting the channel on the DVD recorder.
Connections Before you start Connection to an Audio System • When you change the connections, all devices should be turned off. • Refer to the operation manual accompanying external devices for more information.
Getting started Easy DVD recording The following will help you to understand easily how to record to DVD discs. Note: Make sure batteries are in the remote control and you have connected this unit and the TV correctly. Step 1: Choose a disc type Step 2: Insert a blank disc There are several types of recordable DVD discs to choose from. Choose a recordable DVD disc type based on your playing/recording/editing reguirements.
Getting started Step 3: Select the recording speed DISPLAY TIMER PROG. POWER OPEN/CLOSE DISPLAY TIMER PROG. CH REC MONITOR ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 PQRS 7 WXYZ 9 SPACE 0 CM SKIP DISPLAY TIMER PROG. .@/: 1 ABC 2 OPEN/CLOSE A A CH REC MONITOR .
Getting started Channel setting All channels are stored in the DVD recorder when purchased. We recommend that you get available channels in your area stored using “Auto Preset” in the Channel Preset of the SETUP menu. 4 POWER Select “SETUP” using { / B buttons, then press ENTER button. SETUP menu will appear. 1 TIMER PROG. .
Getting started Before you start Channel setting (cont’d) Adding/deleting channels Select “Manual Preset” using K / L buttons, then press ENTER button. Manual Preset menu will appear. POWER TIMER PROG. .@/: 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 A CH REC MONITOR Setup > Channel Preset > Manual Preset 1 SKIP F H G B PLAY FWD h g STOP C 1 7 TOP MENU MENU/LIST K ENTER { B RETURN ZOOM L 2 3 4 5 6 Playing discs Select “SETUP” using { / B buttons, then press ENTER button.
Getting started Selecting the TV stereo or SAP You can select a sound channel to output from TV. “Stereo” has been selected as the default. 1 Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear. Screen: 4 Select “TV Audio Select” using K / L buttons, then press ENTER button. Option window will appear. POWER TIMER PROG. .
Getting started Before you start Setting the clock Auto Clock Setting 4 Select “Auto Clock Setting” using K / L buttons, then press ENTER button. Option window will appear. CH Setup > Clock Clock Setting Auto Clock Setting Daylight Saving Time TIMER PROG. .
Getting started Setting the clock (cont’d) Manual Clock Setting 4 1 Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear. Screen: Select “Clock Setting” using K / L buttons, then press ENTER button. A clock setting window will appear. POWER TIMER PROG. .
Getting started Before you start Setting the clock (cont’d) 8 Press K / L buttons to select AM or PM, then press ENTER button. Clock menu will appear, then the settings will be activated. Press SETUP button to exit. Although seconds are not displayed, they begin counting from zero. POWER TIMER PROG. .
Getting started Setting the clock (cont’d) Setting the daylight saving time When Daylight Saving Time is ON, the DVD recorder clock will automatically move forward one hour on the first Sunday in April and move back one hour on the last Sunday in October. 4 Select “Daylight Saving Time” using K / L buttons, then press ENTER button. Daylight Saving Time options will appear. POWER CH Setup > Clock Daylight Saving Time Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear.
Getting started Before you start Selecting the TV aspect ratio 4 Select “TV Aspect” using K / L buttons, then press ENTER button. Option window will appear.
Recording Information on DVD recording Information Recording speed This DVD recorder can record to DVD-R and DVD-RW discs.When recording, you will need to select a recording format between Video mode and VR mode depending on the disc format.The disc format for DVD-R is always “Video format,” so a recording format will be “Video mode”.
Recording Before you start Information on DVD recording (cont’d) Information on copy control Some satellite broadcasts include copy-protected information. For recording these, refer to the following. VR DVD-RW Video DVD-RW Copy-free Copy-once Copyprohibited ver.1.1 Playable ver.1.1 CPRM compatible ver.1.1 ver.1.1 CPRM compatible This Unit DVD player Not Playable ver.2.0 Recordable Not Recordable Note • Once DVD-RW/R (Video mode) is finalized, you cannot record additionally or edit.
Recording Formatting a disc Choosing the recording format of a blank disc Video DVD-RW VR DVD-RW When inserting a blank disc, the DVD recorder starts to initialize the blank disc. After that, you can record to the disc with the recording format selected in SETUP menu. You are allowed to set a specified time for chapter marks. 3 POWER Select “Recording” using K / L / { / B buttons, then press ENTER button. Recording menu will appear. TIMER PROG. .
Recording Before you start Formatting a disc (cont’d) 6 POWER Select “Auto Chapter” using K / L buttons, then press ENTER button. Option window will appear. ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 VR mode OFF 5 minutes 10 minutes 10 minutes 15 minutes 30 minutes 60 minutes REC TUV 8 WXYZ 9 SPACE 0 CM SKIP PQRS 7 REC MODE CLEAR PAUSE SKIP F H G B PLAY REV FWD h g STOP C 8 “10 minutes” has been selected as the default.
Recording Formatting a disc (cont’d) Reformatting a disc Video DVD-RW VR DVD-RW If you are using a DVD-RW disc, by default it will be VR mode.You can change this to Video mode from SETUP menu. 1 4 POWER Select “Yes” using { / B buttons, then press ENTER button. Option window will appear. TIMER PROG. .@/: 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 A CH REC MONITOR Disc REC Edit TUV 8 WXYZ 9 SPACE 0 CM SKIP PQRS 7 REC MODE CLEAR Press SETUP button to display SETUP/DISC menu.
Recording Before you start Basic recording Video DVD-RW VR DVD-RW DVD-R Follow the steps below to record TV programs. Select a desired channel to record using CH K / L buttons or number buttons. TIMER PROG. .@/: 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 A 4 CH REC MONITOR CH 1 OPEN/CLOSE DISPLAY 2 5 REC TUV 8 WXYZ 9 SPACE 0 CM SKIP PQRS 7 REC MODE CLEAR PAUSE SKIP F H G B PLAY This operation may take a while to be recognized.
Recording Basic recording (cont’d) Checking the recording picture quality Video DVD-RW VR DVD-RW DVD-R You can confirm the recording picture quality with the recording speed you have selected before attempting to record to a DVD disc. 1 While the DVD recorder is in STOP or REC with a DVD disc to record inserted, press REC MONITOR button. The TV program will be on the screen in the recording picture quality with the recording speed you have selected. POWER 2 Press REC MONITOR button again to exit.
Recording Before you start One-touch timer recording Video DVD-RW VR DVD-RW DVD-R Turn on the DVD recorder and load a recordable disc. Make sure that the TV input is set on the DVD recorder. Select a desired channel to record using CH K / L buttons or number buttons. POWER Press REC button, then press REC button repeatedly until a desired recording time (30 minutes to 4 hours) appears on the TV screen. Recording will start. TIMER PROG. .
Recording Timer recording Video DVD-RW VR DVD-RW DVD-R You can program the unit to record up to 8 programs, up to a year in advance. Daily or weekly program recordings are also available. • Be sure to set the clock before making a timer programming. • Insert a recordable disc. 4 Select “Timer Programming” using K / L buttons, then press ENTER button. Timer Programming list will appear. POWER TIMER PROG. .@/: 1 ABC 2 DEF 3 Date 1. - - 2. - - 3.
Recording Before you start Timer recording (cont’d) 10 Select the channel number to record using K / L buttons, then press B button. Press ENTER button when all information required is entered. Your program setting will be stored. • To set another program, repeat steps 5 to 10. • To exit, press SETUP button. Setup > Recording > Timer Programming Date Start 1. JAN/12 10:00PM 2. - - - End CH 10:30PM CH8 Speed 9 Select a recording speed using K / L buttons. 11 OPEN/CLOSE DISPLAY TIMER PROG. .
Recording Timer recording (cont’d) Hints for timer recording • If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer settings will be lost. • If a disc is not on the tray, the indicator flashes and timer recording cannot be performed. Please insert a recordable disc. • When all the timer recording is completed, the indicator flashes.To play or eject the recorded disc, press POWER button first, and then press PLAY B or OPEN/CLOSE A button.
Recording Before you start Settings for an external source Connection to an external source Video DVD-RW VR DVD-R DVD-RW Another source (VCR camcorder etc.) OUTPUT S- VIDEO VIDEO AUDIO L OUTPUT AUDIO R R VIDEO S -VIDEO L or or Audio cable Audio cable Getting started S-Video Video cable cable Connections Connect the external source properly to the DVD recorder by using input jacks either LINE2 (Front) or LINE1 (Rear).
Recording Settings for an external source (cont’d) Recording from an external source Video DVD-RW VR DVD-RW DVD-R Before recording from an external source, see the instructions for the connection on page 37. 1. Turn the TV and the DVD recorder on, and be sure to select the input of the TV to which the DVD recorder is connected. 2. Press OPEN/CLOSE A button to open the disc tray, then place the disc to record properly. POWER 1 CH 3. Press OPEN/CLOSE A button to close the disc tray. 4.
Recording Before you start Finalizing the discs Video DVD-RW VR DVD-RW DVD-R 4 POWER DISPLAY TIMER PROG. .@/: 1 ABC 2 A Select “Yes” using { / B buttons, then press ENTER button. Finalizing will start. CH REC MONITOR 1 REC GHI 4 JKL 5 MNO 6 TUV 8 WXYZ 9 SPACE 0 PAUSE H F PLAY REV FWD h g STOP C Finalizing SETUP 1 TOP MENU MENU/LIST K ENTER REPEAT { B RETURN ZOOM L To cancel finalizing... Edit Format Disc Protect OFF ON Finalizing is complete.
Recording Setting a disc to protect VR DVD-RW To prevent accidental recording, editing, or erasing the titles, you can protect them from DISC menu. 3 POWER TIMER PROG. .@/: 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 A Select “Disc Protect OFF ➔ ON” using K / L buttons, then press ENTER button. Option window will appear. 1 CH REC MONITOR Disc REC TUV 8 WXYZ 9 SPACE 0 CM SKIP PQRS 7 REC MODE CLEAR Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear.
Playing discs Before you attempt to play DVD discs, read the following information. Color systems This DVD recorder is compatible to play the following discs. To play a DVD, make sure that it meets the requirements for Region Codes and Color Systems as described below. Discs that have the following logos will play on the DVD recorder. Other Disc types are not guaranteed to play. DVDs are recorded in different color systems throughout the world.
Playing discs Basic playback Playback Video DVD-RW VR DVD-RW VR mode: DVD-R Original 1 1 Press POWER button on the remote control or the front panel of the DVD recorder. When you are playing a DVD, turn the TV on and be sure to select the input to which the DVD recorder is connected. JAN/1 12:00AM 4 POWER 1 2 JAN/1 1:00AM 3 1 TIMER PROG. .
Playing discs DVD-V CD MP3 1 Place the disc onto the disc tray with its label facing up and make sure to align the disc to the disc tray guide. POWER 1 DISPLAY TIMER PROG. .@/: 1 ABC 2 A CH REC MONITOR REC GHI 4 JKL 5 MNO 6 TUV 8 WXYZ 9 SPACE 0 PAUSE CM SKIP SKIP H F G B PLAY REV FWD h g STOP C 2 SETUP Press OPEN/CLOSE A button to open the disc tray. The disc tray will open. If you are playing a DVD-Video disc, a menu may appear.
Playing discs Basic playback (cont’d) Playing discs using the disc menu DVD-V A DVD disc contains a disc menu that describes the contents or allows you to customize the playback. For example, the menu may offer choices for subtitle languages, special features, or chapter selection. Sometimes these are displayed automatically when you start playback, otherwise only appear when you press MENU / LIST button. 1 Press MENU / LIST button. The DVD main menu will appear.
Playing discs Before you start Basic playback (cont’d) Playing discs using the title menu DVD-V 1 If the feature is not available, may appear on the TV screen. POWER Select a title to play using the K / L / { / B buttons, then press ENTER button. Play will begin at the title you selected. TIMER PROG. .@/: 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 A CH REC MONITOR TOP MENU button: Displays the ‘Title menu’ of a DVD disc which varies with the disc.
Playing discs Special playback Resume play Video DVD-V DVD-RW Video DVD-R CD DVD+RW VR DVD-RW 2 DVD+R CH Press PLAY B button. In a few seconds, play will resume from the point at which it stopped last.You can resume play at the same point even if you turn off the DVD recorder. MP3 You can resume play from where you stopped playing the disc last. 1 REC MONITOR .
Playing discs Before you start Special playback (cont’d) Skipping TV commercials during play Video VR DVD-RW DVD-RW DVD-R e.g. Press CM SKIP button once You can skip TV commercials by pressing CM SKIP button, so that you can enjoy the recorded programs without interrupting. POWER OPEN/CLOSE DISPLAY TIMER PROG. .@/: 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 CH REC MONITOR CM Skip 30 sec. 1 REC WXYZ 9 CM SKIP PAUSE SKIP F H (forwarding 30 seconds.
Playing discs Special playback (cont’d) Step by step playback Video DVD-V DVD-RW DVD-R DVD+RW Video VR DVD-RW 2 DVD+R POWER Press SKIP G button repeatedly. The play will advance one frame (or step) at a time when you press the SKIP G button with the sound muted. 1 During play, press PAUSE F button. Play will pause and sound will be muted. TIMER PROG. .
Playing discs Before you start Special playback (cont’d) Zoom B PLAY Video DVD-V DVD-RW DVD-R DVD+RW Video DVD-RW DVD+R During play, press ZOOM button. Zoom menu will appear. Screen: x1.2 01:23:45 x1.5 g STOP C 2 Select a desired zoom factor to zoom using { / B buttons, then press ENTER button. The zoom area will be displayed. SETUP TOP MENU MENU/LIST K ENTER REPEAT { 1 B RETURN ZOOM L 2 3 DVD-Video Note x2.
Playing discs Search Title/Chapter search Video DVD-V DVD-RW VR DVD-RW DVD-R Video DVD+RW DVD+R POWER Using SKIP H / G buttons DISPLAY TIMER PROG. .@/: 1 ABC 2 OPEN/CLOSE A 1 CH During play, press SKIP G button to skip the current title or chapter and move to the next. The title or chapter will move forward by one at a time.
Playing discs Before you start Search (cont’d) Track search CD MP3 CH Using SKIP H / G buttons REC MONITOR ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 REC During play, press SKIP G button to skip the current track and move to the next. The track will move forward one at a time. TUV 8 WXYZ 9 SPACE 0 CM SKIP PQRS 7 REC MODE CLEAR PAUSE SKIP F H G 1 B PLAY REV FWD h g STOP C Getting started To go back to the previous track, press SKIP H button.The track will move backward one at a time.
Playing discs Repeat/Random/Program playback Repeat play Video DVD-V DVD-R CD DVD-RW VR DVD-RW Video DVD+R DVD+RW MP3 1 During play, press REPEAT button. Repeat menu will appear. Screen: 1 1 01:23:45 DVD-Video OFF Title Chapter A-B 2 00:00:30 Audio CD OFF Track All A-B 114 00:00:30 MP3 OFF Track All Group 2 Select a desired option to repeat using K / L buttons, then press ENTER button. The selected repeat play will start.
Playing discs Before you start Repeat/Random/Program playback (cont’d) Program play CD You can program the disc to play in your desired order. TIMER PROG. .
Playing discs Selecting the format of audio and video You can select the format of audio and video as you prefer depending on the contents of the disc you are playing. Switching audio soundtrack VR DVD-V DVD-RW When playing a DVD-Video disc recorded with two or more soundtracks (these are often in different languages), you can switch them during play. On DVD-RW discs recorded in VR mode, you can switch to main (L), sub audio (R) or a mix of both (L/R).
Playing discs Before you start Selecting the format of audio and video (cont’d) CD MP3 1 2 POWER Select icon using { / B buttons, then press ENTER button. Audio menu will appear. TIMER PROG. .@/: 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 PQRS 7 TUV 8 WXYZ 9 A 1 CH REC MONITOR REC MODE CLEAR 1 Audio CD 00:00:00 3 REC SPACE 0 PAUSE F Select a desired audio channel using K / L buttons, then press ENTER button. Audio channel will switch.
Playing discs Selecting the format of audio and video (cont’d) Switching camera angles DVD-V Some DVD Video discs feature scenes shot from two or more angles, check the case for details: it should be marked with a angle icon if it contains multi-angle scenes. 2 POWER Select icon using { / B buttons, then press ENTER button. Angle will switch each time you press ENTER button. CH REC MONITOR REC 1 01:23:45 .
Editing Editing discs with Video mode Title list allows you to check the titles recorded on the disc easily.You can choose a title to play from this screen and easily edit the titles as you prefer. You can edit discs with Video mode for the following items. Be sure that once you edit titles, they will not remain as original.
Editing Information on disc editing (cont’d) Editing discs with VR mode For discs with VR mode, you can edit from “Original” menu or “Playlist” menu, which is created from the original. Editing original titles Editing playlists The following items can be used to edit the original titles.
Editing Before you start Editing DVD-RW discs in Video mode Deleting titles Video DVD-RW 3 POWER Select a desired title using K / L / { / B buttons, then press ENTER button. Edit menu will appear. TIMER PROG. .@/: 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 A CH REC MONITOR Disc > Edit REC WXYZ 9 CM SKIP PAUSE SKIP F H G B 1 PLAY REV FWD h g STOP Press SETUP button. Select “DISC” using { / B buttons, then press ENTER button. DISC menu will appear.
Editing Editing DVD-RW discs in Video mode (cont’d) Putting names on titles Video DVD-RW You can put title names on the titles and change the names from this menu. The names you put on the titles will be displayed on a titlelist. 4 POWER Select “Edit Title Name” using K / L buttons, then press ENTER button. A window for entering a title name will appear. TIMER PROG. .@/: 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 A CH REC MONITOR Disc > Edit > Edit Title Name Press SETUP button.
Editing Before you start Editing DVD-RW discs in Video mode (cont’d) 6 POWER Select “Yes” using { / B buttons, then press ENTER button. The name you entered will be activated for the title. TIMER PROG. .
Editing Editing DVD-RW discs in Video mode (cont’d) Setting or clearing chapter markers Video DVD-RW You can put chapter markers in each title. Once a chapter is marked, you can use it for the chapter search feature. You can set chapter markers at a specified time you selected for titles with more than 5 minutes. 4 POWER Select “Chapter Mark” using K / L buttons, then press ENTER button. Option window will appear.
Editing Before you start Editing DVD-RW discs in VR mode (Original) Deleting titles Deleting titles VR DVD-RW 4 POWER Select a desired title using K / L / { / B buttons, then press ENTER button. Original menu will appear. 1 .
Editing Editing DVD-RW discs in VR mode (Original) (cont’d) Deleting parts of titles VR DVD-RW You can delete part of a title, the disc space to record will be increased. Be advised that the parts once deleted cannot be brought back to the disc. 4 Select a desired title using K / L / { / B buttons, then press ENTER button. Original menu will appear. 1 Press SETUP button. Select “DISC” using { / B buttons, then press ENTER button. DISC menu will appear.
Editing Before you start Editing DVD-RW discs in VR mode (Original) (cont’d) 7 POWER CH Disc > Edit > Original 1 REC JAN/ 1 1:00AM CH12 JKL 5 MNO 6 TUV 8 WXYZ 9 SPACE 0 PAUSE CM SKIP SKIP H G B PLAY REV FWD g XP STOP C SETUP 9 TOP MENU MENU/LIST K ENTER REPEAT { This operation may take a while to be completed. B RETURN ZOOM L 7 8 9 After writing to disc is completed, press SETUP button to exit DISC menu.
Editing Editing DVD-RW discs in VR mode (Original) (cont’d) 3 6 Select “Original” using { / B buttons, then press ENTER button. Original list will appear. To enter a title name, follow the steps of “Guide to edit title name” on this page. character set POWER TIMER PROG. .
Editing Before you start Editing DVD-RW discs in VR mode (Original) (cont’d) Setting or clearing chapter markers VR DVD-RW 4 Select a desired title using K / L / { / B buttons, then press ENTER button. Original menu will appear. POWER TIMER PROG. .@/: 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 A CH REC MONITOR Disc > Edit > Original 1 OPEN/CLOSE DISPLAY REC TUV 8 WXYZ 9 SPACE 0 CM SKIP PQRS 7 REC MODE CLEAR PAUSE SKIP F H G 6 B 1 JAN/ 1 1:00AM CH12 Press SETUP button.
Editing Editing DVD-RW discs in VR mode (Original) (cont’d) : This operation may take a while to be completed. Disc > Edit > Original 1 Chapter 2/2 Title Delete Scene Delete Edit Title Name ChapterAdd Mark Delete Index Picture Protect OFF ON F Yes JAN/ 1 1:00AM CH12 No XP 1 • You cannot delete the first chapter marker of each title. Chapter 2/2 7 Disc > Edit > Original 1 Chapter 1/1 TIMER PROG. .
Editing Before you start Editing DVD-RW discs in VR mode (Original) (cont’d) 6 Select “Original” using { / B buttons, then press ENTER button. Original list will appear. Select “Yes” using { / B buttons, then press ENTER button. A picture for thumbnail will be set.
Editing Editing DVD-RW discs in VR mode (Original) (cont’d) Setting titles to protect VR DVD-RW To prevent accidental editing, or erasing the titles, you can protect them from the original menu. 4 POWER Select a desired title using K / L / { / B buttons, then press ENTER button. Original menu will appear.
Editing Before you start Editing DVD-RW discs in VR mode (Original) (cont’d) Releasing titles from protecting VR DVD-RW 4 Select a desired title using K / L / { / B buttons, then press ENTER button. Original menu will appear. 1 POWER CH Disc Edit > Original 2 TIMER PROG. .
Editing Editing DVD-RW discs in VR mode (Playlist) Deleting titles VR DVD-RW In VR mode, even when a title is deleted from a Playlist, the original title will remain in an Original list. The disc space to record will not be increased. 4 POWER Select a desired title using K / L / { / B buttons, then press ENTER button. Playlist menu will appear. 1 1 JAN/ 1 1:00AM CH12 XP Disc > Edit > Playlist 1 Select “Edit” using K / L buttons, then press ENTER button. Original/PlayList menu will appear.
Editing Before you start Editing DVD-RW discs in VR mode (Playlist) (cont’d) Deleting parts of titles VR DVD-RW 4 Select a desired title using K / L / { / B buttons, then press ENTER button. Playlist menu will appear. POWER .@/: 1 ABC 2 DEF 3 CH REC MONITOR GHI 4 JKL 5 MNO 6 Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set REC TUV 8 WXYZ 9 SPACE 0 CM SKIP PQRS 7 REC MODE CLEAR PAUSE SKIP F H G 6 B Press SETUP button.
Editing Editing DVD-RW discs in VR mode (Playlist) (cont’d) Part of a title will be deleted. POWER 7 OPEN/CLOSE DISPLAY TIMER PROG. .@/: 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 A Disc > Edit > Playlist Select “Delete” using K / L buttons, then press ENTER button. Option window will appear.
Editing Before you start Editing DVD-RW discs in VR mode (Playlist) (cont’d) 7 Select a desired title using K / L / { / B buttons, then press ENTER button. Playlist menu will appear. Select “Yes” using { / B buttons, then press ENTER button. The name you entered will be activated for the title. POWER TIMER PROG. .
Editing Editing DVD-RW discs in VR mode (Playlist) (cont’d) Setting or clearing chapter markers VR DVD-RW You can put chapter markers in each title. Once a chapter is marked, you can use it for the chapter search feature. You can put a chapter marker anywhere you want. When the number of chapter markers in the playlist comes to 999 in total, you cannot add any more chapter markers.
Editing Before you start Editing DVD-RW discs in VR mode (Playlist) (cont’d) : This operation may take a while to be completed. Disc > Edit > Playlist 1 F Yes JAN/ 1 1:00AM CH12 No XP 1 Chapter 2/2 CH 7 REC MONITOR Title Delete Scene Delete Edit Title Name ChapterAdd Mark DeleteSet Index Picture Yes JAN/ 1 1:00AM CH12 TIMER PROG. .
Editing Editing DVD-RW discs in VR mode (Playlist) (cont’d) 3 6 Select “PlayList” using { / B buttons, then press ENTER button. Playlist will appear. Select “Yes” using { / B buttons, then press ENTER button. A picture for thumbnail will be set. POWER 1 2 CH REC MONITOR JAN/1 4:00AM JAN/1 3:00AM 5 REC Disc > Edit > Playlist 3 JAN/1 2:00AM 4 .
Editing Before you start Editing DVD-RW discs in VR mode (Playlist) (cont’d) Adding titles to a Playlist VR DVD-RW 4 POWER Select “Add New Title” using K / L / { / B buttons, then press ENTER button. Original list will appear.
Editing Editing DVD-RW discs in VR mode (Playlist) (cont’d) Deleting a Playlist VR DVD-RW A Playlist can be deleted if no longer needed. 1 Press SETUP button. Select “DISC” using { / B buttons, then press ENTER button. DISC menu will appear. 4 POWER Select “Delete Playlist” using K / L / { / B buttons, then press ENTER button. Option window will appear. TIMER PROG. .
Editing Before you start Editing DVD-R discs Deleting titles DVD-R Disc > Edit 1 Title Delete Edit Title Name Chapter Mark POWER TIMER PROG. .@/: 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 A CH JAN/ 1 1:00AM CH12 XP REC MONITOR 0:01:25 You cannot select “Chapter Mark”. REC TUV 8 WXYZ 9 SPACE 0 CM SKIP PQRS 7 REC MODE CLEAR PAUSE SKIP Press SETUP button. Select “DISC” using { / B buttons, then press ENTER button. DISC menu will appear.
Editing Editing DVD-R discs (cont’d) Putting names on titles DVD-R You can put names on the titles and change the names from this menu. The names you put on the titles will be displayed on a titlelist. 4 Select “Edit Title Name” POWER using K / L buttons, then press ENTER button. A window for entering a title name will appear. 1 Press SETUP button. Select “DISC” using { / B buttons, then press ENTER button. DISC menu will appear. Disc Format Finalize .
Changing the SETUP menu Before you start Tour of the SETUP menu The following table is the contents which you can set and the default settings. Refer to the following table for useful operation. SETUP menu Items (highlight is the default) Original English French Set the language for audio. Subtitle Language OFF English French Set the language for subtitle. OSD Background Transparency 100% Set the background transparency of OSD screen.
Changing the SETUP menu Language setting Press STOP button if you are playing a disc. POWER 1 OPEN/CLOSE DISPLAY TIMER PROG. .@/: 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 PQRS 7 TUV 8 WXYZ 9 A Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear. CH REC MONITOR REC MODE CLEAR REC SPACE 0 PAUSE 4 CM SKIP SKIP F H G B PLAY REV FWD h g STOP C Setup Menu 1 5 2 Select “SETUP” using { / B buttons, then press ENTER button. SETUP menu will appear.
Changing the SETUP menu Before you start Language setting (cont’d) Disc Menu Language (Default : English) Set the language for Disc Menu. Setup > Playback TV Aspect Parental Lock Disc Menu Language Audio Language Subtitle Language 4:3 Letter Box All English TV Aspect Original OFF Audio Language Parental Lock Disc Menu Language Subtitle Language Digital Out 4:3 Letter Box All English English French Original Spanish OFF Other • Select a setting using K / L buttons, then press ENTER button.
Changing the SETUP menu Display setting Press STOP button if you are playing a disc. POWER 1 OPEN/CLOSE DISPLAY TIMER PROG. .@/: 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 PQRS 7 TUV 8 WXYZ 9 A Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear. CH REC MONITOR REC MODE CLEAR REC SPACE 0 PAUSE CM SKIP SKIP F H G B PLAY REV FWD h g STOP C Setup Menu 1 5 2 Select “SETUP” using { / B buttons, then press ENTER button. SETUP menu will appear.
Changing the SETUP menu Setup > Display Setup > Display OSD Background Transparency 35% OSD Language 1 English FL Dimmer Bright Screen Saver 10 minutes OSD Background Transparency 35%100% 85% OSD Background Color 1 70% OSD Language English 50% FL Dimmer Bright 35% 25% Screen Saver 10 minutes 10% 0% Setup > Display Setup > Display OSD Background Transparency 35% OSD Background Transparency 35% OSD Background Color 1 English OSD Background Color OSD Language FL Dimmer Bright FL Dimmer 11 2
Changing the SETUP menu Audio setting Choose the appropriate Audio settings for your equipment. It will only affect DVD discs during playback. Press STOP button if you are playing a disc. POWER OPEN/CLOSE DISPLAY TIMER PROG. .@/: 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 PQRS 7 TUV 8 WXYZ 9 A CH 1 REC MONITOR Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear.
Changing the SETUP menu A Settings for PCM (Default : Auto) Original OFF udio Settings for Dolby Digital (Default : Stream) English Original OFF Audio C Settings for DTS (Default : OFF) g udio OFF PCM ON Dolby Digital ON DTS OFF OFF • Select a setting using K / L buttons, then press ENTER button. Your setting will be activated. ON : Outputs DTS signals. When your amplifier/decoder is compatible with DTS, set to “ON”. OFF : No DTS, signal is output.
Changing the SETUP menu Settings for Parental lock level Some DVD-Video discs feature a Parental Lock level. Playback will stop if the ratings exceed the levels you set, it will require you to enter a password before the disc will playback.This feature prevents your children from viewing inappropriate material. POWER OPEN/CLOSE DISPLAY TIMER PROG. .@/: 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 PQRS 7 TUV 8 WXYZ 9 A Press STOP button if you are playing a disc.
Changing the SETUP menu Before you start Settings for Parental lock level (cont’d) Parental Lock (Default : All) Set the Parental Lock level.
Others Troubleshooting Before requesting service for this DVD recorder, check the table below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation. Symptom Power The power does not turn on. Remedy • Check that the AC power cord is connected securely. • (In case of power failure) Check the braker. Picture Sound There is no picture. • Re-connect the connecting cord securely.
Others Symptom Playback The disc does not play. Some functions such as Stop, Search, or Slow-motion Play cannot be performed. • Depending on the disc, you may not be able to do some of the operations above. See the instruction manual supplied with the disc. The language for the sound track cannot be changed. • Multilingual tracks are not recorded on the DVD VIDEO, DVD-R or DVD-RW being played. • The DVD VIDEO prohibits the changing of the language for the sound track.
Others Troubleshooting (cont’d) Symptom Remedy Others The DVD recorder does not operate properly. • When static electricity, etc., causes the DVD recorder to operate abnormally, unplug the DVD recorder and then plug it in again. The disc tray does not open when you press OPEN/CLOSE A button. • It may take a few seconds for the disc tray to open after you have recorded or edited a disc. • This is because the DVD recorder is adding disc data to the disc.
Others Before you start Troubleshooting (cont’d) Error message Cause Solution Delete unnecessary titles (pages 59, 63, 72). Recording Error You cannot record more the 999 chapters on one disc. (The maximum is 999) You are trying to record onto the VR mode DVD-RW disc on which the number of recording chapters comes up to the maximum (999). Delete unnecessary chapter markers (pages 67, 76). This disc has no space to write the Control Information when recording or deleting contents.
Others Glossary Analog audio An electrical signal that directly represents sound. Compare this to digital audio which can be an electrical signal, but is an indirect representation of sound. See also Digital audio. Aspect ratio The width of a TV screen relative to its height. Conventional TVs are 4:3 (in other words, the screen is almost square); widescreen models are 16:9 (the screen is almost twice as wide as it is high).
Others General DVD-Video, DVD-RW/R, CD-DA, CD-RW/R AC120 V, 60 Hz 23 W (standby: 4.0 W) 6.0 lbs ( 2.7 kg ) 17 1/8" x 2 5/8" x 11 3/4" (435 x 66 x 297 mm) 41Fº to 104Fº (5ºC to 40ºC) 5% to 85% (no condensation) NTSC Recording Recording format 13.
Español Precaciones Para futura referencia, anote los números de modelo y de serie (indicados en la parte posterior esta unidad) en el espacio provisto. No. de modelo: DV-SR45U No. de serie: AVISO: PARA REDUCIR EL RIESGO DE INCENDIO O ELECTROCHOQUE NO EXPONGA ESTE APARATO A LA HUMEDAD. PRECAUCIÓN: PARA EVITAR DESCARGAS ELÉCTRICAS, HAGA QUE LA PALETA ANCHA DEL ENCHUFE COINCIDA CON LA RANURA ANCHA E INTRODÚZCALA HASTA EL FONDO.
Español Importantes Medidas de Seguridad y Precauciones or de cobre de antena, tamaño de los conductores tierra, ubicación de la unidad de descarga de la antena, conexión a los electrodos tierra, y requerimientos de los electrodos tierra (Fig.A). FIGURA A EJEMPLO DE CONEXIÓN A TIERRA DE ANTENA DE ACUERDO CON EL CÓDIGO ELÉCTRICO NACIONAL. CABLE DE COBRE PARA LA ANTENA. ABRAZADERA DE LA ANTENA.
Español Fácil grabación de DVD Estas instrucciones le ayudarán a entender fácilmente cómo grabar discos DVD. Nota: Asegúrese que las pilas están en el mando a distancia y que ha conectado correctamente esta unidad y el TV. Paso 1: Elija un tipo de disco Paso 2:Coloque un disco en blanco Puede elegir entre distintos tipos de discos DVD grabables. Elija un tipo de disco DVD grabable de acuerdo con sus necesidades de reproducción/ grabación.
Español Paso 3: Seleccione la velocidad de grabación DISPLAY TIMER PROG. OPEN/CLOSE POWER DISPLAY TIMER PROG. CH REC MONITOR ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 PQRS 7 TUV 8 WXYZ 9 SPACE 0 CM SKIP CH REC MONITOR .@/: 1 ABC 2 DEF 3 TIMER PROG. .
CONSUMER LIMITED WARRANTY (Valid for warranty service in the U.S.