Instruction manual

18 (E)
SR84 / SR85, CH33
5-2. Connecting Cables
Model name CH33-XXCP CH33-XXCE CH33-XXNP CH33-XXNE
Item
Type Cable with unterminated end
Conduit Included (stainless steel)
No conduit is used 100 mm from the
None
slider-side connector and unterminated
end
Cable sheath PVC Polyurethane PVC Polyurethane
Cable length 3, 5, 10, 15 m (standard product),
Supports only 1 m units from 1 to 30 m (special-order product)
Terminal processing Unterminated end (standard product), Connector supporting various controller
manufacturers can be attached (special-order product)
Protective design grade IP65 (scale-side connector)
Safety standards and Not applicable
laws and regulations
Operating temperature range 0 to +50
o
C
Storage temperature range –20 to +55
o
C
Mass Approx. 0.02 kg + 0.157 kg/m
Recommended minimum 50 mm
bending radius (when there is
repeated bending)
Recommended minimum Conduit unit: 25 mm, No conduit unit: 20 mm
bending radius (when there is
no repeated bending)
Dimensions See section 6, “Dimensional Diagrams.”
The information here is subject to change without notice. When designing machines, please request the latest
specifications from your nearest sales representative.
5-3. Accessories
SR84 / SR85
M4 ✕ 20 Hex. socket-head cap screws 2
(For slider installation)
M6 ✕ 35 Hex. socket-head cap screws 3 to 32*
(For scale installation)
* The number of bolts differs depending Measuring Measuring
on the measuring length. Length (mm) No. of bolts Length (mm) No. of bolts
140 3 1340 15
240 4 1440 16
340 5 1540 17
440 6 1640 18
540 7 1740 19
640 8 1840 20
740 9 2040 22
840 10 2240 24
940 11 2440 26
1040 12 2640 28
1140 13 2840 30
1240 14 3040 32
M4 Hex. nuts (For slider rear surface installation) 2
Spacer: t = 0.1 mm 3
Spacer: t = 1.0 mm 1
Accuracy table 1
Installation Manual 1