Specifications
20 EN
Getting started
Channel setting (cont’d)
ZOOM
DISPLAY
SETUP
TOP MENU
MENU/LIST
REC MODE
REC/OTR
PAUSESKIP SKIP
PLAY
CM SKIP
AUDIO
OPEN/CLOSE
FWD
REV
CLEAR
1
2
3
4
5
6
7
8
9
SPACE
0
A
HG
ENTER
PROG.
RETURN
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
B
C
{
B
K
L
h
g
F
STOP
RAPID PLAY
NB034
TIMER
PROG
.
OPERATE
DVD RECORDER
2
3
4
5
3
6
4
Select “Skip” using [Cursor
K / L], then press [Cursor B].
5
Select “ON” using [Cursor
K / L], then press [Cursor {].
• To skip another channel,
repeat steps 2 to 5.
6
Press [SETUP] to exit.
You can set the unit to skip
channels you can no longer
receive or seldom watch when
you access channels using
[PROG. K / L].
1
Follow the steps 1 to 3 in
“Manual Tuning” on page 19.
2
Select “Position” using [Cursor
K / L], then press [Cursor B].
3
Select the position number you
wish to skip using [the Number
buttons] or [Cursor K / L], then
press [Cursor {].
To skip a Preset channel
Notes on using [the Number buttons]:
• Enter channel numbers as a two-digit number for the quickest
result. For example, to select channel 6, press [0] and [6]. If you only
press [6], channel 6 will be selected after 2 seconds. You can only
select channels 1 to 99.
• You can select the external input mode “AV1”, “AV2”, “AV3” or “AV4”.
• To select the “AV1”, “AV2”, “AV3” or “AV4”, press [0], [0], [1] or
[0], [0], [2] or [0], [0], [3] or [0], [0], [4] accordingly or use
[PROG. K / L].
• To select the external input mode “AV5” for DV connection, you
must use [PROG. K / L].
To select a channel
ZOOM
DISPLAY
SETUP
TOP MENU
MENU/LIST
REC MODE
REC/OTR
PAUSESKIP SKIP
PLAY
CM SKIP
AUDIO
OPEN/CLOSE
FWD
REV
CLEAR
1
2
3
4
5
6
7
8
9
SPACE
0
A
HG
ENTER
PROG.
RETURN
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
B
C
{
B
K
L
h
g
F
STOP
RAPID PLAY
TIMER
PROG
.
OPERATE
2
3
4
5
1
You cannot select a position
number where “– – –” appears
next to the number, because
“Skip” is set to “ON” for that
position number.
5
Move the channel to another
position number using [Cursor
K / L], then press [ENTER].
• To move another channel,
repeat steps 3 to 5.
6
Press [SETUP] to exit.
You can replace two channels.
1
In stop mode, press [SETUP].
2
Select “Channel” using [Cursor
K / L], then press [ENTER].
3
Select “Move” using [Cursor
K / L], then press [ENTER].
4
Select the position number of
which you want to change the
channel using [Cursor K / L],
then press [ENTER].
Move
6
Downloaded From Disc-Player.com Sharp Manuals