Specifications
34 EN
Recording
You can set the unit to start
recording whenever it detects
the video signal from the external
tuner.
Preparing for the Satellite Link
Timer Recording:
Preparation on the tuner
• The external tuner should be
equipped with some kind of
timer function. Using timer
function of the tuner, set it to
be turned on when it comes
to the time you want to start
recording, and off when it
comes to the time you want to
finish recording. (Refer to the
tuner’s manual on how to set
the timer.)
• Make sure to turn the power off
when you finish setting.
Preparation on this unit
• Make sure to select the desired
Recording mode beforehand.
L
R
S-VIDEO
ANALOG
AUDIO OUT
COAXIAL
DIGITAL AUDIO OUTPUT
PCM/BITSTREAM
L
R
IN
(AV3)
OUT
AUDIO IN
(AV3)
ANTENNA
OUT
IN
AV2 (DECODER)
AV1 (TV)
COMPONENT
VIDEO OUTPUT
Y
PR/CR
PB/CB
External tuner
(commercially available)
Scart cable (commercially available)
1
In stop mode, press [SETUP].
2
Select “Recording” using
[Cursor K / L], then press
[ENTER].
Satellite Link
Bilingual Recording Audio
Auto Finalise
External Input Audio
Auto Chapter
Main
Stereo
10 minutes
OFF
Recording Audio Select (XP)
Dolby Digital
Recording
3
Select “Satellite Link” using
[Cursor K / L], then press
[ENTER].
Setting menu will appear.
Satellite Link
Start Mode
17:30 SP
To Standby Mode
4
Select the time and recording
mode using [Cursor K / L], then
press [ENTER].
5
Set the desired start time
using [Cursor K / L], then press
[Cursor B].
• The hour can be selected
among 0-23.
• Repeat procedures in step 5 to
set the desired minutes.
• If you wish to go back to the
left, press [Cursor {].
6
Select the recording mode
using [Cursor K / L].
See page 23 for details.
7
Press [ENTER].
“To Standby Mode” is highlighted.
Satellite Link
Start Mode
17:30 SP
To Standby Mode
8
Press [ENTER] again.
In a second, the unit will be
turned off automatically as
it goes into the Satellite Link
standby mode.
• Until the time you set in “Start”,
the clock will appear on the
front panel.
• “Sat” will appear on the front
panel display at the start time.
To cancel the Satellite Link
function while in the Satellite
Link standby mode:
Press [ OPERATE] to turn on the
unit.
To cancel the Satellite Link
function while the Satellite Link
Recording is in progress:
Press [STOP C] on the front panel
of the unit.
Satellite Link
ZOOM
DISPLAY
SETUP
TOP MENU
MENU/LIST
REC MODE
REC/OTR
PAUSESKIP SKIP
PLAY
CM SKIP
AUDIO
OPEN/CLOSE
FWD
REV
CLEAR
1
2
3
4
5
6
7
8
9
SPACE
0
A
HG
ENTER
PROG.
RETURN
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
B
C
{
B
K
L
h
g
F
STOP
RAPID PLAY
NB034
TIMER
PROG
.
OPERATE
DVD RECORDER
1
2
3
4
5
6
7
8
8
Downloaded From Disc-Player.com Sharp Manuals