Specifications

8 EN
Before you start
Functional overview (cont’d)
Note
• Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent
damage to the unit.
• This unit does not have an RF modulator.
Rear Panel
L
R
S-VIDEO
ANALOG
AUDIO OUT
COAXIAL
DIGITAL AUDIO OUTPUT
PCM/BITSTREAM
L
R
IN
(AV3)
OUT
AUDIO IN
(AV3)
ANTENNA
OUT
IN
AV2 (DECODER)
AV1 (TV)
COMPONENT
VIDEO OUTPUT
Y
PR/CR
PB/CB
12 3 114 5 67 9108
1 ANTENNA IN jack
• Connect to an antenna or cable.
2 ANTENNA OUT jack
• Connect to the Aerial jack on your TV, cable
box or direct broadcast system.
Use the supplied Round Coaxial cable.
3 AV2 (DECODER) Scart terminal
• Connect to the Scart terminal of VCR,
camcorder, or other Audio-Video equipment.
Use a commercially available Scart cable.
4 AV1 (TV) Scart terminal
• Connect to the Scart terminal on your TV.
Use the supplied Scart output adaptor with
the Video / Audio cables if your TV has no
Scart terminal.
5 S-VIDEO OUT jack
• Connect to the S-Video input jack on your TV.
Use a commercially available S-Video cable.
6 S-VIDEO IN (AV3) jack
• Connect to the S-Video output jack on your
VCR, camcorder or other equipment.
Use a commercially available S-Video cable.
7 COMPONENT VIDEO OUTPUT jacks
• Connect to the component video input jacks
on your TV.
Use a commercially available Component
video cable.
8 AUDIO IN (AV3) jacks
• Connect to the audio output jacks on your
VCR, camcorder or other Audio-Video
equipment.
Use a commercially available Audio cable.
9 ANALOG AUDIO OUT jacks
• Connect to the audio input jacks on your TV.
Use a commercially available Audio cable.
10 DIGITAL AUDIO OUTPUT PCM/ BITSTREAM
(COAXIAL) jack
• Connect to an amplifier with a digital input
jack such as a Dolby Digital decoder, DTS
decoder or MPEG decoder.
Use a commercially available Coaxial cable.
11 Mains cable
• Connect to a standard AC outlet.
Downloaded From Disc-Player.com Sharp Manuals