Specifications

- 26 - EN
For your convenience:
 If you attempt to enter a number greater than the total time
of the current title, the time search box disappears and  
message appears on up-left corner of screen.
 If you give up entering the time simply press RETURN
button, and the operation is cancelled.
Accessing tracks using number buttons:
You can play any track you want, just by pressing the
corresponding number button.
For the track numbers which are greater than 9
use +10 button. Press this button once and then
type the two digit track number.
If you attempt to enter a number greater than the total
number of tracks on disc,   message is displayed on
the screen.
Repeat Play
Repeat Viewing
Press REPEAT during play.
Each time this button is pressed, a different repeat box is
displayed on the screen.
 If  ALL is displayed, the whole disc will be played
again.
 If  TRACK is displayed, the current track will be
played again.
NOTE:
Once the REPEAT function is set, the unit will remain in
repeat mode until another button is pressed.
Repeating sections between two specific points. (A
B repeat)
Press A-B during play at the point where repeat
play is to commence (A).
 A is displayed on screen.
Press A-B again at the point where repeat play is to
be concluded (B).
 AB is displayed and the repeat-play of the selection
between points A and B starts.
To return to normal play
Press A-B again. A-B Repeat is disabled.
Convenient Functions
Displaying the time information
Press TIME during play.
Each time this button is pressed, a different time information
box is displayed on the screen.
 If Single elapsed is displayed, the VFD display on the
unit shows the elapsed time for the title which is being
played
 If Single remain is displayed, the VFD display on the unit
shows the remaining time for the title which is being played.
 If Total Elapsed is displayed, the elapsed time for the disc
is being displayed.
 If Total remain is displayed the remaining time for the disc
is being displayed.
Pressing the TIME key for the fifth time closes display menu
screen. DISPLAY OFF is diplayed.
Displaying a scene with a larger and closer view
This zoom-in function enables you to take a closer look at
the scene you are viewing. This is especially a considerate
function when you are watching science fiction or
adventure movie.
Press ZOOM during play.
Zoom On is displayed on the screen and the picture is
now larger. You can change the zooming ratio by pressing
ZOOM button more
than once. There are 2, 3, 4, 1/2, 1/
3 and 1/4 zoom modes.
NOTE:
You can move in the picture ie, change the zoomed location
by using the 3465 arrow keys. This is valid for
zoom-in only.
To return to normal play
After zoom ratio is 1/4x, press ZOOM again. The picture is
now in its normal size.
Downloaded From DvDPlayer-Manual.com Sharp Manuals