Specifications

- 13 -
EN
IN
IN
Digital Audio Output Connectors:
For the best sound, the player can be connected via optical or coaxial digital audio outputs to an AV amplifier with a
built-in Dolby Digital/DTS/MPEG decoder. With the use of six speakers, you can enjoy 5.1-channel surround sound. (See
page 33.)
AmplifierDVD player
OR
Dust protection cap
DVD player
Coaxial or optical cable
(commercially available)
to coaxial or optical
digital audio input connector
Amplifier
Front speaker
(Left)
Front speaker
(Right)
Centre speaker
Rear speaker
(Left)
Rear speaker
(Right)
Subwoofer
 NOTE:
• When the player is connected to a separate decoder box or amplifier through the DIGITAL AUDIO OUT connector, you
may sometimes hear a short noise when selecting the sound system in the DVD menu. This is not a malfunction.
Playing Dolby Digital, DTS or MPEG audio with a digital connection
Set the applicable type of signal (Dolby Digital, DTS or MPEG) in “Digital Output” to “Bitstream”. (See page 33.)
Playing 2 channel audio with a digital connection
Set the applicable type of signal (Dolby Digital or MPEG) in “Digital Output” to “LPCM”. (See page 33.)
For DTS, LPCM is not applicable.
DV-SV97H_ EN.indd 13 2/27/2006 3:24:21 PM
Downloaded from www.Manualslib.com manuals search engine
Downloaded From Disc-Player.com Sharp Manuals