User Manual

SHARP DV-SV97H QUICK START GUIDE
Printed in Turkey 9JB50074835
06P02-TR-NV
This Quick Start Guide is intended to provide easy steps regarding each stage of the setup of your DVD Player, so that
you can enjoy the exceptional audio and video quality of DVDs as soon as possible.
See the Operation Manual for full details about operational procedures, precautions, and other information.
Accessories
Installing batteries
Connecting the TV
Turning on the Player and TV/
Selecting the AV channel on TV
CAUTION:
• Be sure to turn off the Player and equipment to be
connected before any connections are made.
• Read through the operation manual for the
equipment to be connected.
• Be sure that the colours of the connectors and
plugs match up when using a VIDEO/AUDIO cable.
• Be sure to keep the Player connection cables
separate from the TV antenna cable when you
install the Player, lest it should cause electrical
interference when you are watching television
programs.
• DTS audio cannot be produced with an analogue
connection.
a
Turn on the TV.
b
Turn on the Player by pressing OPERATE.
• If connections have been made successfully, the
startup screen will appear on your TV screen.
c
If the startup screen does not automatically
appear, select the “AV” channel on your TV by
pressing the “AV” button on your TV’s remote or
on your TV set.
Recheck all your connections.
Remote control
Batteries for
Remote control
Operation Manual
DVD Player
SHARP
DVD Player
DVD Player
OPERATE
The HDMI cable and SCART cable are not
supplied with the Player. Those cables are
commercially available.
HDMI HDMI
HDMI cable (commercially available)
TV
TV
SCART cable (commercially available)
SCART SCART
a
b
c
DV-SV97QG.indd1DV-SV97QG.indd1 2006/02/2111:55:332006/02/2111:55:33